You can configure SNMP traps through web interface or IPMI View 2.
Web interface:
1. Configuration
2. Alerts
3. Click on one of the Alert No, then click Modify (after you configured, you can click Send Test Alert to test you setting)
4. Event Severity: Informational/Warning/Critical/Non-recoverable
Destination IP: the IP that you want to get the trap
5. Click Save
6. Now you are able to receive traps in your SNMP program (or you can use IPMI View to receive traps, see next method)
IPMI View 2: ( https://www.supermicro.com/wdl/utility/IPMIView/ ) 1. Click add a new system (the icon located on the left top corner)
2. Enter the System Name, IP address then click OK
3. After you click OK you will see your server located on the left panel, double the domain you just created
4. Enter Login ID, Password then click Login
5. Click BMC Setting, then enter the IP address and hit Enter and click Update
6. Now click Show Trap Info (the icon with a green check mark), then click Open Trap Receiver
7. By sending a test trap from web interface, you are able to see the message now in IPMI Trap Receiver V2.0