 |
|
 |
| AS-1012A-MTF |
|
| |
|
| CPU |
- Single 942-pin Socket AM3+
- Supports up to Single 8/4-Core ready AMD Opteron™ 3000 Series processor
- HT3.0 Link support
|
| Chipset |
- AMD chipset SR5650/SP5100
|
| |
|
|
| Memory Capacity |
- 4 DIMM sockets
- Support up to 32GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 4 DIMMs
- Single or Dual channel memory bus
|
| Memory Type |
- DDR3 1600/1333/1066MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| |
|
|
| SATA |
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel 82574L single-port Gigabit Ethernet, 10/100/1000Base-T support
|
| VGA |
- Matrox G200eW 16MB DDR2 graphics
|
| Super I/O |
|
| |
|
|
| PCI-E/PCI |
- 1 PCI-E 2.0 x4 (in x8 slot)
|
| |
|
|
| SATA |
|
| USB |
- 7x USB 2.0 ports (2x rear / 2x header - 4 ports / 1x type A)
|
| VGA |
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
- 1 header & 1 port
|
| IPMI |
- 1x dedicated IPMI LAN port
|
| |
|
|
| BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
|
|
| Hot-swap |
- 4 hot-swap 3.5?SATA drive bays
- Enterprise SATA HDD only recommended
|
|
|
|
| Fans |
- 4x 4cm heavy duty counter-rotating fans
|
| |
|
|
| 350W AC power supply w/ PFC |
| AC Voltage |
- 100-240 V, 50-60 Hz, 4.2-1.8 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| +3.3V |
|
| Certification |
Gold Certified
[ Test Report ]
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU 4-phase Switching Voltage Regulator
|
| FAN |
- Total up to four 4-pin fan headers
- 4 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
| LED |
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
|
|
