Motherboard H11DSU-iN
Processor/Chipset
A+ Server 2123US-TN24R25M (Complete System Only)
A+ Products Systems CPU
  • Dual AMD EPYC™ 7001/7002* series Processors
    (* Board revision 2.x required)
  • Socket SP3
  • Supports CPU cTDP up to 280W**
Cores
  • Up to 32 Cores (Board revision 1.x + 7001 Processors)
  • Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
  • System on Chip (SoC)
Note ** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory2U [ 2123US-TN24R25M ]

Memory Capacity
  • 32 DIMM slots
  • Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
  • Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
  • 8-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors)
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
    (* Board revision 2.x required + 7002 Processors)
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)



On-Board Devices
Integrated Board
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Connectivity
  • Dual 25GbE SFP28 ports via AOC-2UR68-M2TS-O (Mellanox ConnectX-4 Lx EN)
VGA
H11DSU-iN

Views: | Angled View | Top View |
| Front View | Rear View |


Key Features
• Virtualization
• Cloud Computing
• High-End Enterprise Server
• Hyperconverged Storage

1. Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
2. 4TB Registered ECC DDR4 2666MHz SDRAM in 32 DIMMs (7001 Processors)
8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs (Board revision 2.x required + 7002 Processors)
  • ASPEED AST2500 BMC
Expansion Slots
2U
  • No expansion slot available.*
3. Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
 key (SFT-OOB-LIC) included
 for OOB BIOS management
4. Dual 25G SFP28 LAN ports
5. Drive Bays:
 24 hot-swap 2.5" U.2 NVMe drive bays
6. 1600W Redundant Power Supplies
Titanium Level (96%)
(Full redundancy based on configuration and application load)

Input / Output
NVMe
  • 24 U.2 NVMe support
LAN
  • Dual 25G SFP28 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (for optimal performance 16 DIMMs & at least 24/32 cores per CPU is recommended). Minimum requirement is 2 CPUs, 4 DIMMs, 1 NVMe HDD drive.

USB
  • 3 USB 3.0 ports (2 rear + 1 Type A)
VGA
  • 2 VGA ports (1 rear, 1 onboard)
Others
  • 1 COM port
  • 2 SATA DOM power connectors
  • TPM 2.0 header
  • System BIOS
    BIOS Type
    • AMI 128Mb SPI Flash EEPROM
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3
    • PCI 2.2
    • ACPI 5.1
    • USB Keyboard Support
    • SMBIOS 3.1.1
    * Please refer to the system manual for more information.
    Drivers & Utilities BIOS IPMI Tested Memory NVMe Options Tested AOC
    Chassis
    Form Factor
    • 2U
    Model
    • CSE-219U2TS-R1K62P Manuals OS Certification Matrix Quick-References Guide Drive Options


    Dimensions
    Height
    • 3.5" (89mm)
    Width
    Product SKUs
    AS -2123US-TN24R25M
    • A+ Server 2123US-TN24R25M
    • 17.2" (437mm)
    Depth
    • 28.46" (723mm)
    Weight
    • Net Weight: 39 lbs (17.7 kg)
    • Gross Weight: 63 lbs (28.6 kg)
    Motherboard
    H11DSU-iN
    Processor/Chipset
    CPU
    • Dual AMD EPYC™ 7001/7002* series Processors
      (* Board revision 2.x required)
    • Socket SP3
    • Supports CPU cTDP up to 280W**
    Cores
    • Up to 32 Cores (Board revision 1.x + 7001 Processors)
    • Up to 64 Cores (Board revision 2.x + 7002 Processors)
    Chipset
    • System on Chip (SoC)
    Note ** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
    System Memory
    Front Panel
    Buttons
    • Power On/Off button
    • System Reset button
    LEDs
    • Power LED
    • Hard drive activity LED
    • 2x Network activity LEDs
    Memory Capacity
    • 32 DIMM slots
    • Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
    • Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
    • 8-channel memory bus
    Memory Type
  • System Overheat LED / Fan fail LED /
    UID LED
  • Drive Bays
    Hot-swap
    • 24 hot-swap 2.5" U.2 NVMe drive bays
    • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors)
    • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
    DIMM Sizes
    • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
      (* Board revision 2.x required + 7002 Processors)
    Memory Voltage
    System Cooling
    Fans
    • 4 heavy-duty PWM fans with optimal fan speed control
    Air Shroud
    • 1 Air Shroud
    • 1.2V
    Error Detection
    • Corrects single-bit errors
    • Detects double-bit errors (using ECC memory)
    On-Board Devices
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    • ASPEED AST2500 BMC
    Network Connectivity
    • Dual 25GbE SFP28 ports via AOC-2UR68-M2TS-O (Mellanox ConnectX-4 Lx EN)
    VGA
    • ASPEED AST2500 BMC
    Expansion Slots
    2U
    • No expansion slot available.*
    Input / Output
    NVMe
    • 24 U.2 NVMe support
    LAN
    • Dual 25G SFP28 LAN ports
    • 1 RJ45 Dedicated IPMI LAN port
    USB
    • 3 USB 3.0 ports (2 rear + 1 Type A)
    VGA
    • 2 VGA ports (1 rear, 1 onboard)
    Others
    • 1 COM port
    • 2 SATA DOM power connectors
    • TPM 2.0 header
    System BIOS
    BIOS Type
    • AMI 128Mb SPI Flash EEPROM
    BIOS Features
    Power Supply
    1600W Redundant Power Supplies with PMBus
    Total Output Power
    • 1600W/1000W
    Dimension
    (W x H x L)
      • Plug and Play (PnP)
      • DMI 2.3
      • PCI 2.2
      • ACPI 5.1
      • USB Keyboard Support
      • SMBIOS 3.1.1
    * Please refer to the system manual for more information.
  • 73.5 x 40 x 203 mm
  • Input
    • 100-127Vac / 13 - 9A / 50-60Hz
    • 200-240Vac / 10 - 8A / 50-60Hz
    +12V
    • Max: 83.3A / Min: 0A (100-127Vac)
    • Max: 133A / Min: 0A (200-240Vac)
    12Vsb
    Chassis
    Form Factor
    • 2U
    Model
    • CSE-219U2TS-R1K62P
    Dimensions
    Height
    • 3.5" (89mm)
    Width
    • 17.2" (437mm)
    Depth
    • 28.46" (723mm)
    Weight
    • Net Weight: 39 lbs (17.7 kg)
    • Gross Weight: 63 lbs (28.6 kg)
    Front Panel
    Buttons
    • Power On/Off button
    • System Reset button
    LEDs
    • Power LED
    • Hard drive activity LED
    • 2x Network activity LEDs
    • Max: 2.1A / Min: 0A
    Output Type
    • 25 Pairs Gold Finger Connector
    Certification Titanium Level96%
  • System Overheat LED / Fan fail LED /
    UID LED
  • Drive Bays
    Hot-swap
    • 24 hot-swap 2.5" U.2 NVMe drive bays
    Titanium Level
    [ Test Report ]
    PC Health Monitoring
    CPU
    • Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
    • CPU switching voltage regulator
    System Cooling
    Fans
    • 4 heavy-duty PWM fans with optimal fan speed control
    Air Shroud
    • 1 Air Shroud
    FAN
    • Up to 4-fan status tachometer monitoring
    • Up to four 4-pin fan headers
    • Status monitor for speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip Support
    • Thermal control for 4x Fan connectors
    • I²C Temperature Sensing Logic
    LED
    • CPU / System Overheat LED
    Other Features
    • Chassis Intrusion Detection
    • Chassis Intrusion Header
    Operating Environment / Compliance
    RoHS
    • RoHS Compliant
    Environmental Spec.
    • Operating Temperature:
      10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:
    Power Supply
    1600W Redundant Power Supplies with PMBus
    Total Output Power
    • 1600W/1000W
    Dimension
    (W x H x L)

      -40°C to 70°C (-40°F to 158°F)
    • Operating Relative Humidity:
      8% to 90% (non-condensing)
    • Non-operating Relative Humidity:
      5% to 95% (non-condensing)
    Information in this document is subject to change without notice.
    Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.