 | |
 | | AS-2022TC-BIBQRF |
- A+ Server 2022TC-BIBQRF (Black)
|
| |
| | CPU |
- Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron 4000 Series processors
- HT3.0 Link support
|
| Chipset |
- AMD SR5670 + SP5100 Chipset
|
Note: Supports 4000 series processors with Max ACP 75W (TDP 95W)
| | |
| | Memory Capacity |
- 12 DIMM sockets
- Support up to 192GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
| Memory Type |
- DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| | |
| | Infiniband |
- Mellanox ConnectX QDR Infiniband 40Gbps Controller
|
| SATA |
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
|
| Super I/O |
|
| | |
| | PCI-E |
|
| | |
| | Infiniband |
- 1 External QSFP Infiniband Connector
|
| SATA |
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 4x USB 2.0 ports
- 2x Rear, 1x header
|
| VGA |
|
| Serial Ports |
- 1x Fast UART 16550 serial port
|
| | |
| | BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
- 3.47" (88mm) / 11.22" (285mm)
|
| Width |
- 17.25" (438mm) / 26.38" (670mm)
|
| Depth |
- 28.5" (724mm) / 39.76" (1010mm)
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- 4x Power On/Off button
- 4x UID button
|
| LEDs |
- 4x Power status LED
- 4x UID LED
- 4x Network activity LEDs
- 4x System overheat / fan failed /
power failed LED
|
| |
| | HDD Bay |
- 3x 3.5" Hot-swappable SATA Hard Drive Bays
(per node)
- Enterprise SATA HDD only recommended
|
| |
| | Fans |
- 4x PWM fans w/ Optimal Fan Speed Control
|
| |
| | 1400W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input |
- 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
|
| DC Output |
- 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
|
| With Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
Gold Certified
[ Test Report ]
|
| | |
| | CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 4-fan status tachometer monitoring
- Up to four 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 30°C (50°F to 86°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
