SuperStorage 6028R-E1CR16T

  Products  Systems   [ 6028R-E1CR16T ]



SAS3 HW RAID controller






Integrated Board
Super X10DRH-CT
Key Features

1. Dual socket R3 (LGA 2011) supports

    Intel® Xeon® processor E5-2600

    v4/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB ECC 3DS LRDIMM , up to

    DDR4- 2400MHz ; 16x DIMM slots
3. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8
4. Dual 10GBase-T LAN w/ Intel® X540
5. 16x 3.5" Hot-swap drive bays:

    12x 3.5" Hot-swap SAS3 drive bays

    and 4x NVMe hybrid drive bays

    (SAS3/SATA3/NVMe*); 2x 2.5"

    Hot-swap SATA drive bays (rear)
6. SAS3 via Broadcom 3108 controller, HW RAID
7. Server remote management: IPMI 2.0

    / KVM over LAN / Media over LAN
8. 4x 8cm hot-swap redundant PWM

    cooling fans
9. 1000W Redundant Power Supplies

    Titanium Level


 Drivers & Utilities   BIOS   IPMI   Tested Memory  NVMe Options   Manuals    OS Certification Matrix    Drive Options 


Product SKUs
SSG-6028R-E1CR16T
  • SuperStorage 6028R-E1CR16T (Black)
 
Motherboard


Super X10DRH-CT
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *

  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

 
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • SAS3 (12Gbps) via Broadcom 3108 controllers; HW RAID 0,1,5,6,10,50,60
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GbE
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
 
Input / Output
SAS
  • 16 SAS3 (12Gbps) ports
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
  • 2 USB 2.0 ports (rear)
  • 1 Type A
VGA
  • 1 VGA port
Serial Port / Header
  • 1 Fast UART 16550 port / 1 Header
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-829HTS-R1K02LPB
 
Dimensions
Width
  • 17.2" (437mm)
Height
  • 3.5" (89mm)
Depth
  • 25.5" (647mm)
Weight
  • Gross Weight: 58 lbs (26.3 kg)
  • Net Weight: 34 lbs (15.4 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2 Network activity LEDs
  • System Information LED
  • Power fail LED
 
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16 slot
  • 6 PCI-E 3.0 x8 slots
 
Drive Bays
Hot-swap
  • 16x 3.5" Hot-swap SAS3 drive bays
Optional
  • 2x 2.5" Hot-swap SATA drive bays (rear)
 
Backplane
SAS3 expander backplane
 
System Cooling
Fans
  • 4x 8cm hot-swap redundant PWM cooling fans
 
Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power
  • 800W/1000W
Dimension

(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 9.8 - 7A / 50-60Hz
  • 200-240Vac / 7 - 5A / 50-60Hz
  • 200-240Vdc / 7 - 5A (for CCC only)
+12V
  • Max: 66.7A / Min: 0A (100-127Vac)
  • Max: 83A / Min: 0A (200-240Vac)
  • Max: 83A / Min: 0A (200-240Vdc)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level96%  Titanium Level

  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
See Parts List



Parts List - (Items Included)
 

Part Number

Qty

Description

Motherboard / Chassis MBD-X10DRH-CT

CSE-829HTS-R1K02LPB
1

1
Super X10DRH-CT Motherboard

2U Chassis
Backplane BPN-SAS3-826EL1-N4 1 12-port 2U SAS3 12Gbps single-expander backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices
Backplane BPN-SAS3-829HA-A4 1 4-port internal SAS3 12Gbps backplane, support up to 4x 3.5-inch SAS3/SATA3 HDD/SSD
Cable 1 CBL-SAST-0568 2 MINI SAS HD,12G,INT,35CM,30AWG
Parts MCP-220-82609-0N 1 Rear 2.5 x 2 Hot swap HDD kit for 216B/826B/417B/846X/847B
Parts MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Heatsink / Retention SNK-P0047PS 1 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB
Heatsink / Retention SNK-P0048AP4 1 2U Active CPU Heat Sink for Intel R2/R3/B2/B3 and AMD C32
Power Supply PWS-1K02A-1R 2 1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH
FAN 1 FAN-0118L4 4 80 x 80 x 38 mm, 9.5K RPM, 4-pin PWM Fan, Hot
Drive Tray(s) MCP-220-00075-0B 12 Black 3.5" HDD tray
Drive Tray(s) MCP-220-82903-0N 4 Internal mid tray with handle for SC829H




Optional Parts List
  Part Number Qty Description
3108 Cache Protection BTR-TFM8G-LSICVM02

BKT-BBU-BRACKET-05
1

1
SuperCap Module

Mounting PCIe Card
4 NVMe Drives Support AOC-SLG3-2E4R

CBL-SAST-0590

MCP-220-00116-0B
2

4

4
NVMe AOC

Internal Mini-SAS HD cable for PCIe SSD NVMe, 12Gb/s, 70cm

3.5" to 2.5" NVMe drive tray
Global Services & Support OS4HR3/2/1

OSNBD3/2/1
-

-
3/2/1-year onsite 24x7x4 service

3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)
Hide Parts List





Note:  * NVMe support requires additional parts in optional parts list
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.