|
|
HW SAS3 Controller Storage Expandable
|
|
|
 | | Integrated Board |
|
|
|
|
|
Key Features
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/
v3 family; QPI up to 9.6GT/s
2.
Up to 3TB† ECC 3DS LRDIMM
, up to
DDR4-
2400†MHz
; 24x DIMM slots
3. 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8, 1 PCI-E
2.0 x4 (in x8); Slot 3 & 1 occupied by
controller and JBOD expansion port)
4. Quad 10GBase-T LAN w/ Intel® X540
5. 16x 3.5" Hot-swap SAS3/SATA3 drive
bays; 2x 2.5" optional Hot-swap
SATA drive bays (rear)
6. Hardware RAID controller and JBOD
Expansion; RAID 0, 1, 5, 6, 10, 50, 60
7. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN
8. 2x 80mm hot-swap rear exhaust
PWM fans
9. 920W Redundant Power Supplies
Platinum Level (94%)
|
|
|
|
 |
|
|
|
|
| |
 | | SSG-6038R-E1CR16N |
- SuperStorage 6038R-E1CR16N (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SAS |
- SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID 0,1,5,6,10,50,60
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Quad 10GBase-T LAN with IntelX® X540 Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| LAN |
- 4 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
- 2 USB 2.0 ports (2 rear)
|
| VGA |
|
| Serial Port / Header |
- 2 Fast UART 16550 serial; 2 COM Ports (1 rear, 1 header)
|
| SATA |
|
| DOM |
- 2 SuperDOM (Disk on Module) ports
|
| TPM |
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Width |
|
| Height |
|
| Depth |
|
| Weight |
- Gross Weight: 76 lbs (34.5 kg)
- Net Weight: 60 lbs (27.2 kg)
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
- Power fail LED
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 slots
- 3 PCI-E 3.0 x8 slots
- 1 PCI-E 2.0 x4 (in x8) slot
- Slot 3 & 1 occupied by controller and JBOD Expansion Port
|
| | |
| | Hot-swap |
- 16x 3.5" Hot-swap SAS3/SATA3 Drive Bays
|
| Optional |
- 2x 2.5" optional rear Hot-swap SATA drive bays
|
| | |
| | SAS3/SATA3 single expander per backplane |
| | |
| | Fans |
- 2x 80mm hot-swap rear exhaust cooling fans
- Redundant cooling
|
| | |
| | 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
| Certification |
  Platinum Certified
[ Test Report ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0/ 2.0/ 3.0/ 4.0
- USB SMBIOS 2.7.1
- UEFI 2.3.1
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|  | |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DRi-T4+
CSE-836BE1C-R920B |
1
1 |
Super X10DRi-T4+ Motherboard
3U Chassis |
| Backplane |
BPN-SAS3-836EL1 |
1 |
16-port 3U SAS3 12Gbps single-expander backplane, support up to 16x 3.5-inch SAS3/SATA3 HDD/SSD |
| Cable 1 |
CBL-SAST-0531 |
4 |
MINI SAS HD,12G,INT,80CM,30AWG |
| Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Parts |
MCP-260-00042-0N |
1 |
STD I/O shield for X9 socket R server MB with Gasket. |
| Heatsink / Retention |
SNK-P0048P |
1 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB |
| Heatsink / Retention |
SNK-P0048AP4 |
1 |
2U Active CPU Heat Sink for Intel R2/R3/B2/B3 and AMD C32 |
| Power Supply |
PWS-920P-SQ |
2 |
920W 1U Redundant PWS W/ Quiet Mode |
| Fan |
FAN-0125L4 |
2 |
80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing |
| Add On Card |
AOC-S3108L-H8IR-O-P |
1 |
SAS-3, GEN-3 RAID card. Supports 12Gb and RAID 0, 1, 5, 6, 10, 50, and 60. Includes 2GB memory |
| Add On Module |
AOM-SAS3-8I8E |
1 |
8-port Mini SAS HD Int-to-Ext cable adapter w/FH bracket,HF,RoHS/REACH |
|
|
|
| |
| | |
Part Number |
Qty |
Description |
| 3108 Cache Protection |
BTR-TFM8G-LSICVM02
BKT-BBU-BRACKET-05 |
1
- |
SuperCap Module
Mounting PCIe Card |
| HDD bracket |
MCP-220-82611-0N
CBL-0289L
CBL-0473L |
1
1
2 |
Dual 2.5" fixed HDD tray
HDD Power Cable
HDD SATA Cable |
| Rear Window |
MCP-220-83608-0N |
- |
Rear hot-swap drive bay for 2x 2.5" drives |
| Global Services & Support |
OS4HR3/2/1
OSNBD3/2/1 |
-
- |
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service |
| Software |
SFT-OOB-LIC •  |
1 |
OOB Management Package (per node license) |
| Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|
|
|
|
