SuperServer F628G3-FT+

  Products  Systems   FatTwin™   [ F628G3-FT+ ]





Integrated Board
Super X10DRFF-IG


Views: | Angled (node) | Top (node) |
| Angled Front (system) | Rear (system) |

Key Features
4 Hot-plug System Nodes in 4U
Front I/O. Each node supports:


1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v4/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB ECC 3DS LRDIMM , up to
    DDR4- 2400MHz ; 16 DIMM slots
3. 3 PCI-E 3.0 x16 slots (support 3
    Double-width GPU/Xeon Phi cards),
    2 PCI-E 3.0 x8 slots
4. Front I/O ports: 2 GbE LAN,
    2 USB 3.0 and 1 VGA connector
5. Built-in Server management tool
    (IPMI 2.0, KVM/media over LAN) w/
    dedicated LAN port
6. 2 Hot-swap 3.5" SATA3 HDDs
7. 2000W High efficiency (96%)
    Redundant PSU; Titanium Level


 Drivers & Utilities   BIOS   IPMI   Tested Memory  Manuals    OS Certification Matrix    Quick-References Guide  Drive Options 

Product SKUs
SYS-F628G3-FT+
  • SuperServer F628G3-FT+ (Black)
 
Motherboard

Super X10DRFF-IG
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support
  • 3 Double-width NVIDIA GPU/Xeon Phi per node
    (total of 12 GPU/Xeon Phi cards in 4U)
  • Supports Intel Xeon Phi
  • Supports NVIDIA K1/K2/K10/K20M/K20X/K40M/K80 (only supports 2 per node), Xeon Phi 5110P, and Xeon Phi 3120P/7120P
 
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
 
Input / Output (per node)
SATA
  • 2x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports
VGA
  • 1x VGA port
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F424AG-R2K04BP
 
Dimensions
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 35" (889mm)
Package
  • 25.6" (W) x 11.8" (H) x 48.0" (D)
Weight
  • Net Weight: 105 lbs (47.63 kg)
  • Gross Weight: 150 lbs (68.04 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • UID LED
 
Expansion Slots (per node)
PCI-Express
  • 3x PCI-E 3.0 x16 (FHFL) slots
    (support 3x Double-width GPU/Xeon Phi)
  • 2x PCI-E 3.0 x8 (LP) slots
 
Drive Bays (per node)
Hot-swap
  • 2x 3.5" Hot-swap SATA3 drive bays
 
System Cooling
Fans
  • 8x 8cm heavy duty 11K fans with air shroud and PWM fan speed control
 
Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W: 100 – 127Vac
  • 1800W: 200 – 220Vac
  • 1980W: 220 – 230Vac
  • 2000W: 230 – 240Vac
  • 2000W: 200 – 240Vdc (UL/cUL only)
Dimension
(W x H x L)
  • 76 x 40 x 336 mm
Input
  • 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
  • 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
  • 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
  • 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
  • 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
+12V
  • Max: 83.3A / Min: 0A (100-127 Vac)
  • Max: 150A / Min: 0A (200-220 Vac)
  • Max: 165A / Min: 0A (220-230 Vac)
  • Max: 166.7A / Min: 0A (230-240 Vac)
  • Max: 166.7A / Min: 0A (200-240 Vac)
    (UL/cUL only)
+5Vsb
  • Max: 1A / Min: 0A
Output Type
  • 27 Pairs Gold Finger Connector
Certification Titanium Level96%  Titanium Level
  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
See Parts List

Parts List - (Items Included)
 
Part Number
Qty
Description
Motherboard / Chassis MBD-X10DRFF-IG
CSE-F424AG-R2K04BP
4
1
Super X10DRFF-IG Motherboard
4U Chassis
Backplane BPN-ADP-F418L 4 BPN;SASADP;SAS827-H8;H8DTT;cable req
Backplane BPN-ADP-2UGPU 4 Backplan adapter card for 2UGPU
Backplane BPN-SAS-F424-A2 4 2-port Fat Twin 6Gbps hot swappable HDD backplane, support up to 2x 3.5-inch SAS/SATA HDD
Cable 1 CBL-PWCD-0578 4 PWCD,US,IEC60320 C14 TO C13,3FT,14AWG
Cable 2 CBL-PWEX-0705 4 8 pin female (10A) to 8 pin female (10A), 12V CPU power cable, 35cm, 16AWG,RoHS/REACH
Cable 3 CBL-0473L 8 SATA,INT,ROUND,ST-ST,21CM,30AWG
Cable 4 CBL-0460L-02 4 8 pin Male to two 4 pin Male power cable, 10cm and 7cm. 18AWG
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual MNL-1742-QRG 1 Quick Reference Guide for F628G3-FT+ / FTPT+
Riser Card RSC-R2UFF-2E16B 4 RSC-R2UFF-2E16B-O-P
Riser Card RSC-F2F-6 4 RSC-F2F-6-O-P
Heatsink / Retention SNK-P0057PS 4 1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB
Heatsink / Retention SNK-P0047PSC 4 1U Passive Front CPU Heat Sink w/ a Side Air Channel for X9, X10 Systems Equipped with a Narrow ILM MB
Power Supply PWS-2K04A-1R 4 AC-DC 2000W, Titanium Level, Redundancy, 1U, PMBus 1.2, +12V/+5Vsb, 360x76x40mm,HF,RoHS/REACH


Optional Parts List
  Part Number Qty Description
Bracket for Xeon Phi MCP-240-42408-0N-PACK 4 System default installed brackets for Nvidia GPUs. This bracket must be ordered if Xeon Phi (MIC) will be implemented
Internal Fan FAN-0150L4 8 Rear internal fan for cooling enhancement
UIO AOC bracket cover MCP-240-42412-0N 4 Front bracket cover for UIO Add-On-Card
Software SFT-OOB-LIC 4 OOB Management Package (per node license)
Software SFT-DCMS-Single 4 DataCenter Management Package (per node license)
Hide Parts List


Note:  Power redundancy is based on configuration. For more information, please refer to user manual.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.