 |
 |
 |
Part Number
 |
Qty
 |
Description
 |
Motherboard / Chassis |
MBD-X12DSC-A6
CSE-826STS-R1K62P1
|
1
1
|
Super X12DSC-A6 Motherboard
2U Chassis
|
Add-on Card / Module
|
AOC-S3808L-L8IT-P |
1 |
8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD w/ exp,RoHS |
Backplane
|
BPN-SAS3-826SEL1-N4 |
2 |
12-port 2U Simply-Double SAS3 12Gbps single-expander backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD and 4x NVMe/SAS3/SATA3 storage devices |
Cable 1
|
CBL-PWEX-0702 |
1 |
8 Pin Female to RA(Right Angle) Big 4 Pin Female Power, 32cm |
Cable 2
|
CBL-SAST-0836 |
2 |
MINI SAS HD,INT,48CM,32AWG w/oSB |
Cable 3
|
CBL-SAST-1264-100 |
1 |
Slimline x8 (STR) to 2x MiniSAS HD x4,65CM,100 OHM,RoHS |
Software
|
SFT-OOB-LIC |
1 |
License key for enabling OOB BIOS management |
Heatsink / Retention
|
SNK-P0077V |
2 |
X12 ICX/CPX CPU Heatsink (78x113x25.5mm), VC Base, Cu Fin |
*Power Supply
|
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
*Power Distributor
|
PDB-PT226S-3824 |
1 |
2U Simply double PDB support redundant power 2.6KW for CS226 |
*Cable 4
|
CBL-0459L |
2 |
AC Power Cord Latch Clamp |
*Cable 5
|
CBL-CDAT-0728 |
1 |
4 Pin to 4 Pin I2C Cable, 65cm, 26AWG, 4 Wires, Pinout 1-1 |
*Cable 6
|
CBL-PWEX-0901 |
2 |
BPN PWEX,2X4F to 2X4F,GPU,P4.2,BLK*4,YEL*2,RED*2,33CM,18AWG, |
*Cable 7
|
CBL-PWEX-0903 |
2 |
BPN PWEX,2X4F to 2X4F,GPU,P4.2,BLK*4,YEL*2,RED*2,72CM,18AWG,For CSE-226STS-R1K62P1 only |
*Cable 8
|
CBL-PWEX-1042-05 |
2 |
[NR]GPU,(2x4F to 2x4F),P4.2,5CM,16AWG,10A/pin,RoHS |
*FAN 1
|
FAN-0154L4 |
2 |
40x40x28 mm, 22.5K RPM, SC813MF Middle Cooling Fan,RoHS/REACH |
*FAN 2
|
FAN-0168L4 |
5 |
80x80x38 mm, 13.5K RPM, Middle Cooling Fan for SC226S Chassis (48-bay) |
*Drive Tray(s)
|
MCP-220-00133-0B |
24 |
Black gen 8 hot-swap 3.5\" HDD tray |
*Rear Window
|
MCP-240-82620-0N |
1 |
SC826S2 rear window w/ 3x LP and 1x AIOM slots for X12DSC |
*Rail Set
|
MCP-290-00168-0N |
1 |
Cable Management Arm, 1U height, 7.5 deep cable arm |
*Drive Tray(s)
|
MCP-290-82607-0N |
2 |
826B/216B rear dummy cover for 2 X 2.5 |
*Air Shroud
|
MCP-310-82616-0B |
1 |
1U air shroud for CSE-826S2 to support rear drive kits |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|