 |
|
 |
| SSG-2028R-DE2CR24L |
- SuperServer 2028R-DE2CR24L (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 8x 288-pin DDR4 DIMM slots
- Up to 1TB† ECC 3DS LRDIMM, 256GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| NVDIMM |
- NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)
|
| |
|
| Chipset |
|
| SAS |
- SAS3 (12Gbps) via Broadcom 3008
|
| SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- 100Mb private ethernet between controller nodes
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1 Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
|
| Others |
- PCI-E 3.0 x8 node to node/NTB connectivity
- PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required
|
| |
|
| SAS |
- 2 JBOD expansion ports per node
(mini-SAS HD)
|
| LAN |
- 2 RJ45 10GBase-T LAN ports
- IPMI LAN shared port
|
| USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
|
| Video |
|
| Serial Port / Header |
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
|
| LEDs |
- Power LED
- Heartbeat LED
- 2 Network activity LEDs
- Power Fail LED
- Overheat/Fan Fail LED
|
| |
|
| PCI-Express (per node) |
- 3 PCI-E 3.0 x8 low-profile slots
|
| |
|
|
| Hot-swap |
- 24 Hot-swap 2.5" SAS3/SATA3 HDD bays
|
| |
|
|
| SAS3 12Gbps passive backplane, redundant architecture with single expander on each motherboard. Motherboard also support 2x mini-SAS HD connectors for JBOD expansion |
| |
|
|
| Fans |
- 4 Hot-swap 8cm midplane fans, 2 counter-rotating 4cm fans per node
|
| |
|
|
| Redundant 1U 1200W/1000W Titanium Power Supply W/PMbus W76xL360xH40mm |
| AC Input |
- 1000W Output @ 100-127V, 12-15A, 50-60Hz
- 1200W Output @ 200-240V, 7-8.5A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1200W: +12V/100A, +5Vsb/4A
|
| Certification |
 
Titanium Certified
[ Test Report ]
|
|
| System power redundancy provided at 240V only. |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
