 |
|
 |
| SSG-6048R-DE2CR24L |
- SuperServer 6048R-DE2CR24L (Black)
|
| |
|
|
Super X10DRS-4U |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 8x 288-pin DDR4 DIMM slots
- Up to 1TB† ECC 3DS LRDIMM, 256GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| NVDIMM |
- NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)
|
| |
|
| Chipset |
|
| SAS |
- SAS3 (12Gbps) via Broadcom 3008
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Dual 10GBase-T LAN with Intel® X540 Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Others |
- PCI-E 3.0 x8 node to node/NTB connectivity
- PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required
|
| |
|
| SAS |
- 2 JBOD expansion ports per node (mini-SAS HD)
|
| LAN |
- 2 RJ45 10GBase-T LAN ports
- IPMI LAN shared port
|
| USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
|
| VGA |
|
| Serial Port / Header |
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Buttons |
|
| LEDs |
- Power LED
- Heartbeat LED
- 2 Network activity LEDs
- Power Fail LED
- Overheat/Fan Fail LED
|
| |
|
| PCI-Express |
- 3 PCI-E 3.0 x8 (1 FHHL, 2 LPHL) slots per controller
|
| |
|
|
| Hot-swap |
- 24x 3.5" Hot-swap SAS drive bays with SES2
|
| |
|
|
| SAS3 12Gbps passive backplane, redundant architecture with single expander on each motherboard. Motherboard also support 2x mini-SAS HD connectors for JBOD expansion |
| |
|
|
| Fans |
- 4x 8cm and 4x 4cm PWM cooling fans
- Redundant cooling
|
| |
|
| 1600W 1U Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-140Vac / 10-7A / 50-60Hz
- 180-240Vac / 11-8A / 50-60Hz
|
| +12V |
- Max: 67A / Min: 0A (100-140Vac)
- Max: 133A / Min: 0A (180-240Vac)
|
| +5Vsb |
|
| Output Type |
- 27 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
