 |
|
 |
| SSG-6048R-E1CR60L |
- SuperServer 6048R-E1CR60L (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 160W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 768 ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SAS |
- Broadcom 3008 SAS3 IT mode
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- SIOM support for flexible networking options
|
| Graphics |
|
| |
|
| USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
|
| VGA |
|
| Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Width |
|
| Height |
|
| Depth |
- 30.2" (767mm)
- With Cable Management Arm Installed:
35.2" (895mm)
|
| Weight |
- Gross Weight: 170.5 lbs (77.3 kg)
- Net Weight: 118 lbs (53.5 kg)
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED
- Power fail LED
|
| LCD |
- 3.5" TFT LCD panel
- Full-Color display with 320x480 pixels
- Real-time system status from IPMI
- Easy read graphical User Interface
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 slots
|
| |
|
|
| Hot-swap |
- 60x 3.5" Hot-swap SAS3/SATA3 drive bays
- 2x 2.5" rear Hot-swap SATA drive bays
|
| Optional |
|
| |
|
|
| SAS3/SATA3 single expander per backplane |
| |
|
|
| Fans |
- 2x 80mm hot-swap rear exhaust cooling fans
- Redundant cooling
|
| |
|
| 2000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-120Vac / 12.5-9.5A / 50-60Hz
- 200-220Vac / 10-9.5A / 50-60Hz
- 220-230Vac / 10-9.8A / 50-60Hz
- 230-240Vac / 10-9.8A / 50-60Hz
- 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
|
| +12V |
- Max: 83.3A / Min: 0A (100-120Vac)
- Max: 150A / Min: 0A (200-220Vac)
- Max: 165A / Min: 0A (220-230Vac)
- Max: 166.7A / Min: 0A (230-240Vac)
- Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
