Key Features
- Compute Intensive Application
- HPC, Data Center, Enterprise
Server
- Hyperscale / Hyperconverged
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:1. Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
2. 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs (7001 Processors) 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required + 7002 Processors)3. 2 PCI-E 3.0 x16 (LP) slot; 1
SIOM card support (flexible networking)
Note: must bundle with Network card4. Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
key (SFT-OOB-LIC) included
for OOB BIOS management5. 6 Hot-swap 2.5" NVMe drive bays M.2 Interface: 1 SATA/PCI-E 3.0 x4 M.2 Form Factor: 2280, 22110 M.2 Key: M-key6. Video via Aspeed AST2500 BMC7. 2600W Redundant Power Supplies Titanium Level (96%) (Full redundancy based on configuration and application load)
Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system
(with minimum 2 CPUs, 8 DIMMs, 1 HDD/NVMe and 1 SIOM card per node).
Up to 32 Cores (Board revision 1.x + 7001 Processors)
Up to 64 Cores (Board revision 2.x + 7002 Processors)
Note
** Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory
(per Node)
Memory Capacity
16 DIMM slots
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
8-channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
24.33" (618mm) H x 9.57" (243mm) W x 45.08" (1145mm) D
Weight
Gross Weight: 85 lbs (38.6 kg)
Net Weight: 54.5 lbs (24.7 kg)
Available Colors
Black
Front Panel (per Node)
Buttons
Power On/Off button
UID button
LEDs
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express
2 PCI-E 3.0 (x16) Low-profile slots
1
SIOM
card support (must bundle with network card)
M.2
Interface: 1 SATA/PCI-E 3.0 x4
Form Factor: 2280, 22110
Key: M-key
Drive Bays (per Node)
Hot-swap
6 Hot-swap 2.5" NVMe drive bays
Note: NVMe Gen4 drives may only operate at Gen3 speed
System Cooling
Fans
4 Heavy duty 8cm PWM fans
AC/DC240V Input Redundant Power Supply
2600W Redundant Power Supplies with PMBus
Total Output Power
2600W
Dimension (W x H x L)
45 x 40 x 480 mm
Input
208-240Vac/15-12.5A / 50-60Hz
220-240Vdc/13.5-12.5A (CQC only)
+12V
Max: 216.6A / Min: 0A
12Vsb
Max: 4.5A / Min: 0A
Output Type
Gold Finger (4HP+2LP-20S output connector)
Certification
Titanium Level [ Cert. in progress ]
Operating Environment
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10°C ~ 30°C (50°F ~ 86°F) * Support for operating above 30°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details.
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Certain products may not be available in your region