 | |
 | | SYS-1028UX-LL3-B8 |
- SuperServer 1028UX-LL3-B8 (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2689 v4
(Included)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 10 Cores / Up to 25MB Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 8x 8GB DDR4-2400MHz (Default)
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| | |
| | Chipset |
|
| SAS |
- Broadcom 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Graphics |
|
| | |
| | SAS |
|
| SATA |
|
| NVMe |
- 2 NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT)
|
| LAN |
- 4 RJ45 Gigabit Ethernet ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 3.0 ports
(2 rear, 2 via header, 1 Type A)
|
| Video |
|
| Serial Port / Header |
- 1 Fast UART 16550 serial
- 1 COM port (rear)
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
| |
|
| PCI-Express |
Expansion slots via riser card:
- 2 PCI-E 3.0 x16, Full-height, 10.5" Length
- 1 PCI-E 3.0 x8, Low-profile
- 1 PCI-E 3.0 x8 SAS3 integrated
|
| | |
| | Hot-swap |
- 8 Hot-swap 2.5" SAS3 drive bays
- 2 Hot-swap 2.5" SATA3 drive bays
- Optional NVMe support: 2 NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports)
|
| | | |
| | Fans |
- 8 heavy duty fans with optimal fan speed control
|
| Air Shroud |
|
| | |
| | 750W Redundant Power Supplies with PMBus |
| Total Output Power |
- 750W: 100 – 127Vac
- 750W: 200 – 240Vac
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.5A Max / 50-60Hz
- 200-240Vac / 4.5A Max / 50-60Hz
|
| +12V |
|
| 12V SB |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  Platinum Level
[ Test Report ]
|
| | |
| | CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight 4-pin PWM fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 20°C (50°F to 68°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
