|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X12SPG-NF
CSE-227GTS-R2K63P
|
2
1
|
Super X12SPG-NF Motherboard
2U Chassis
|
Cable
|
CBL-CDAT-1056 |
1 |
2x5,PH2.54 to 2x5,PH2.54,7cm,28AWG,RoHS |
CBL-PWCD-0376-IS |
2 |
PWCD,US,IEC60320 C19 TO C20,940mm (3ft),14AWG,15A,250V,Black |
CBL-PWEX-1093-36 |
2 |
MicroFit,(2x2F to 2x2F), PH3.0,36CM,10A/pin,16AWG,RoHS |
CBL-PWEX-1148-20 |
2 |
MicroHi,2x4,PH3. to 2x4,PH4.2,MiniFit,20CM,8.5A/p,18AWG, |
CBL-PWEX-1148-50 |
4 |
MicroHi,2x4,PH3. to 2x4,PH4.2,MiniFit,50CM,8.5A/p,18AWG, |
CBL-PWEX-1257 |
1 |
2x4,PH3.0 to 2x4,PH3.0,7CM,4A,22AWG,RoHS |
CBL-SAST-1235-85 |
2 |
Slimline x8 (STR) to Slimline x8 (STR),INT,35CM,85 OHM |
CBL-PWEX-1252Y-53 |
2 |
[NR] FAN,2x4 to 2x 1x4,PH2.54,5A/pin,53CM,22/24AWG |
CBL-PWEX-1252Y-73 |
2 |
[NR] FAN,2x4 to 2x 1x4,PH2.54,5A/pin,73CM,22/24AWG |
Fan Holder
|
MCP-220-82620-0N |
2 |
Dual 2.5 NVMe4 Drive Kit for 216B/826B/417B/846X/847B,RoHS |
Air Shroud
|
MCP-310-22711-0B |
2 |
Mylar air shroud sets X12SPG-NF for SC227G(3x GPU) |
Riser Card
|
RSC-GB-6G4 |
2 |
1U Rear LHS GPU riser card withonePCI-E4.0X16 slot,HF,Ro |
RSC-GF-6G4 |
4 |
1U Front LHS GPU Riser card with onePCI-E4.0x16slot,HF,R |
Storage Controller Card
|
SCC-P2N2FG-P1A-A |
1 |
PDB with 2x NVMe, paired with SCC-P2N2FG-P1A-B |
SCC-P2N2FG-P1A-B |
1 |
PDB with 2x NVMe, paired with SCC-P2N2FG-P1A-A |
Software
|
SFT-OOB-LIC |
2 |
License key for enabling OOB BIOS management |
Heatsink / Retention
|
SNK-P0077V |
2 |
X12 ICX/CPX CPU Heatsink (78x113x25.5mm), VC Base, Cu Fin |
*Power Supply
|
PWS-2K63A-1R |
2 |
1U 2600Wredundant single outpupowersupply with wide range in |
*Fan
|
FAN-0219L4 |
4 |
80x80x80 mm, 14.2K-15K RPM Counter-rotating, Hot-swappable F |
*Front Panel
|
FPB-FP827BR |
2 |
2U BigTwin front control board - right side |
*Rail Set
|
MCP-290-00144-0N |
1 |
2U fixed rail set, quick release, default for 2,3U 17.6"W |
MCP-290-00145-0N |
1 |
Left fixed rail (quick) for 2U 17.6";W chassis |
MCP-290-00146-0N |
1 |
Right fixed rail (quick) for 2U 17.6";W chassis |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|