 |
|
|
| |
 | | SYS-2028U-TN24R4T+ |
- SuperServer 2028U-TN24R4T+ (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 160W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
- 2666/2400 ECC DDR4 NVDIMM
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
- NVDIMM: 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Connectivity |
- 4x 10GBase-T ports via AOC-2UR6N4-i4XT
- Intel® X540 10GBase-T
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| SATA |
- 6x SATA3 (6Gbps) ports (4x SATA3 via optional cable)
|
| SAS |
- 4x SAS3 ports support via optional AOC
|
| NVMe |
|
| LAN |
- 4x 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
|
| Video |
|
| Serial Port / Header |
|
| DOM |
- 2x SuperDOM (Disk on Module) ports
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Width |
|
| Height |
|
| Depth |
|
| Weight |
- Net Weight: 36 lbs (16.4 kg)
- Gross Weight: 72 lbs (32.7 kg)
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
|
| |
|
| PCI-Express |
- 2x PCI-E 3.0 x16 (FH, 10.5" L) slots
- 1x PCI-E 3.0 x8 (LP) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| | |
| | Hot-swap |
- Total 26x Hot-swap 2.5" drive bays (Front: 24, Rear: 2): 4 x Hybrid (NVMe/SATA3) ports - Optional SAS3 support via AOC
|
| | |
| | Fans |
- 4x 8cm heavy duty PWM fans
|
| | |
| 1600W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
| +12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  Titanium Level
[ Test Report ]
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|  | |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DRU-i+
CSE-219UBTS-R1K62P-TN24 |
1
1 |
Super X10DRU-i+ Motherboard
2U Chassis |
| Add-on Card / Module |
AOC-2UR6N4-i4XT-P |
1 |
2U Ultra Riser with 4-port 10GbE RJ45 (10GBase-T) |
| Air Shroud |
MCP-310-82912-0N |
1 |
|
| Backplane |
BPN-SAS3-826TQ-B2B |
1 |
2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD |
| Backplane |
BPN-NVME3-216EB |
1 |
BPN-NVMe3-216A-S4 Backplane Base Board |
| Backplane |
BPN-NVME3-216EL |
2 |
PCIe Gen3x16 input to PLX9765 to support 12x NVMe port |
| Cable 1 |
CBL-0333L-01 |
2 |
8 pin to 8 pin GPU power extension. 40cm. 18/20AWG |
| Cable 2 |
CBL-PWEX-0702 |
1 |
PWEX,2X4F/P4.2 TO 1X4F/P5.08/RA,32CM,18AWG,YEL,BLK*2,RED |
| Cable 3 |
CBL-0097L-03 |
1 |
MINI SAS-4 SATA,INT,51CM,51CM SB,30AWG |
| Cable 4 |
CBL-SAST-0819 |
4 |
OCuLink v 1.0,INT,PCIe NVMe SSD, 65CM,34AWG,RoHS/REACH |
| Cable 5 |
CBL-PWEX-0653 |
3 |
8 pin female to 4 pin female power, 37cm, 18AWG,RoHS/REACH |
| Cable 6 |
CBL-SAST-0820 |
4 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 85CM,34AWG,RoHS/REACH |
| Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Manual |
MNL-1824-QRG |
1 |
SYS-2028U-TN24R4T+ Reference Guide |
| Parts |
MCP-110-00015-0N |
8 |
Pan head screw, #6-32 x 6L |
| Riser Card |
RSC-U2N4-6 |
1 |
2U Ultra Riser Card with 4 NVME and PCI-Ex16,RoHS/REACH |
| Riser Card |
RSC-R1UW-E8R |
1 |
1U RHS WIO Riser card with one PCI-E x8 slot |
| Heatsink / Retention |
SNK-P0058PSU |
2 |
2U Passive CPU Heat Sink for X10 2U 24-DIMM Ultra Series Servers,RoHS/REACH |
| Power Supply |
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
| Mounting Rails |
MCP-290-00053-0N-01
MCP-290-00060-0N |
1
1 |
Auto-latch, inner/outer rail set, quick-release type, 26.9" to 36.4"
Threaded rail adapter default for round hole rack |
|
|
|
| |
| | |
Part Number |
Qty |
Description |
| 2U Cable Management Arm |
MCP-290-00128-0N &
MCP-290-00127-0N-01 |
1 |
2U Supermicro Cable Management Arm 2nd Gen (Compatible for racks that are 42" in depth) |
| Storage Control Card and Cable(s) |
AOC-S3008L-L8e &
1x CBL-SAST-0593
AOC-S3008L-L8i &
1x CBL-SAST-0593
AOC-S3108L-H8iR &
1x CBL-SAST-0593
AOC-S3108L-H8iR-16DD & 1x CBL-SAST-0593
|
1
|
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA; MINI SAS HD,12G,INT,60CM,30AWG
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E; MINI SAS HD,12G,INT,60CM,30AWG
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60; MINI SAS HD,12G,INT,60CM,30AWG
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 16HDD, RAID 0, 1, 5, 6, 10, 50, 60; MINI SAS HD,12G,INT,60CM,30AWG
|
| Network Card(s) |
AOC-SGP-i2/4
AOC-STGN-i1S/i2S
AOC-STG-b4S
AOC-STG-i2T
AOC-STG-i2
AOC-S40G-i2Q
More |
-
-
-
-
-
-
- |
Standard LP, 2/4x GbE RJ45, PCI-E x4, Intel i350
Standard LP, 1/2x 10GbE SFP+, PCI-E x8, Intel 82599EN
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB
Standard LP 2-port 40GbE controller, based on Intel Fortville XL710
AOC Compatibility Matrix |
| CacheVault(s) |
BTR-CV3108-U1 |
- |
CacheVault for Broadcom 3108 with Supercap mounting for 2U Ultra |
| Global Services & Support |
OS4HR3/2/1
OSNBD3/2/1 |
-
- |
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service |
| Software |
SFT-OOB-LIC •  |
1 |
OOB Management Package (per node license) |
| Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|
