SuperServer AS -2125HS-TNR (Complete System Only)

Integrated Board: H13DSH

Key Applications

  • Virtualization
  • Software-defined Storage
  • AI Inference and Machine Learning
  • Cloud Computing
  • Enterprise Server

Key Features

  1. 4th Generation AMD EPYC™ 9004 Series Processors
  2. ASPEED AST2600
  3. 24 x DIMM slots, DDR5 -4800 memory support up to 6 TB
  4. 1 AIOM/OCP NIC 3.0 Slot
    Configuration Options for up to 4 PCI-E 5.0 x16 Slots OR
    Configuration Options for up to 8 PCI-E 5.0 x8 Slots
  5. 24 Hot-swap 2.5” NVMe/SAS/SATA (Optional parts required for NVMe/SAS/SATA configurations)
  6. 1600W Redundant Power Supplies  (Titanium Level)
    Optional Configuration: 1200W/2000W/2600W Redundant Power Supplies (Titanium Level)
    (*Full redundancy based on configuration and application load)
  7. 2 On-board PCI-E 3.0 x4 M.2 NVMe 80mm/110mm (Boot)
...
...
Specifications Resources Parts List
Specifications
Product SKUs
A+ Server AS -2125HS-TNR (Black front & sliver body)
Motherboard
Super H13DSH
Processor
CPU
  • Dual Socket SP5
  • 4th Generation AMD EPYC™ 9004 Series Processor
  • Support CPU TDP up to 360W *
  • (Support CPU cTDP up to 400W)
Cores
  • Up to 192C/384T
Note
  • *Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory
Memory
  • Memory Capacity: 24 DIMM slots
  • Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz
  • Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory
Note
  • For optimal performance AMD recommends full memory population
Memory Voltage
  • 1.1 V
Error Detection
  • Corrects single-bit errors Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • System on Chip
Network Connectivity
  • Via AIOM
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Input / Output
LAN
  • 1 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 port(s) (2 rear)
Video
  • 1 VGA port(s)
System BIOS
BIOS Type
  • AMI 256MB SPI Flash
BIOS Features
  • ACPI 6.4
  • Plug and Play (PnP)
  • SMBIOS 3.5 or later
  • UEFI 2.8
  • USB Keyboard support
Management
Software
  • IPMIView for Linux/ Windows
  • IPMICFG
  • SSM
  • SPM
  • SUM
  • Watch Dog
  • SuperDoctor® 5
Power Configurations
  • Power-on mode control for AC power loss recovery
  • ACPI Power Management
PC Health Monitoring
Voltage
  • System temperature, Memory temperature, CPU temperature, 3.3V standby, +5V standby, +5V, +3.3V, +12V, CPU thermal trip support
FAN
  • Fans with tachometer monitoring
  • Pulse Width Modulated (PWM) fan connectors
  • Status monitor for speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 2U
Model
  • CSE-HS219-R1K63P-A
Dimensions and Weight
Height
  • 3.5" (88.9mm)
Width
  • 17.2" (437mm)
Depth
  • 29.9" (760mm)
Package
  • 10.4" (H) x 23.8" (W) x 43.6" (D)
Weight
  • Net Weight: 39 lbs (17.7 kg)
  • Gross Weight: 72 lbs (32.7 kg)
Available Color
  • Black front & sliver body
Front Panel
Buttons
  • Power On/Off
  • UID button
LEDs
  • HDD activity
  • LAN1 activity
  • Power status
  • System information
Expansion Slots
PCI-Express (PCI-E)
  • Configurable PCI-E slot options up to 8 PCI-E 5.0 x8 or 4 PCI-E 5.0 x16 FH, 10.5"L
Drive Bays / Storage
Hot-swap
  • 24x 2.5" hot-swap NVMe/SATA/SAS drive bays
M.2
  • 2x NVMe (PCIe 3.0 x4, Boot drive only)
  • M-Key, 2280/22110
System Cooling
Fans
  • 4x 8cm heavy duty fans with optimal fan speed control
Air Shroud
  • 2 Air Shroud(s)
Power Supply
1U 1000W/1600W Redundant single output power supply with inp
Dimension

(W x H x L)
  • 73.5 x 40 x 265 mm
AC Input
  • 1000W: 100-127Vac / 12A-9A / 50-60Hz
  • 1600W: 200-240Vac / 9A-7.5A / 50-60Hz
+12V
  • Max: 83.3A / Min: 0A (100Vac-127Vac)
  • Max: 133.3A / Min: 0A (200Vac-240Vac)
12V SB
  • Max: 3.5A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level94%+   Titanium Level

 


  [ Test Report ]
Operating Environment
Environmental Spec.
  • Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Note
  • Operating Temperature based on configurations 


Resources
Parts List
Standard Parts (Parts Included)
Part Number Qty Description
Motherboard / Chassis MBD-H13DSH

CSE-HS219-R1K63P-A
1

1
Super H13DSH Motherboard

2U Chassis
Add-on Card / Module AOM-HS119-IO-P 1 Hyper IO Board,RoHS
Backplane BPN-NVME5-HS219N-S24 1 NVMe Gen5 24-slot direct-attached backplane, support NVMe Gen5/SAS4/SAS3/SATA HDD/SSDs.,RoHS
Cable CBL-GNZ5-1307 1 GNZ4C+ X16 (STR to STR),G5,7CM,85 Ohm,RoHS
CBL-PWEX-1142-40 1 MicroHi,(2x4 to 2x4),PH3.0,40CM,8A/pin,18AWG,RoHS
CBL-PWEX-1142B-20 1 [NR]MicroHi (2x4F to 2x4F), PH3.0, 20cm, 8.5A/p,18#,RoHS
CBL-SAST-1225LP 1 SlimlineLP x8 (LE) to SlimlineLP x8 (RA),30CM,75/85/100,
CBL-CDAT-0676-66 1 [NR] FRONT CNTL,20 TO 20 PIN,PH0.5, FFC,FLAT,66CM,STD
CBL-PWCD-0160-IS 2 PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH
Drive Tray(s) MCP-220-00196-0B 24 Metallic black gen-3 hot-swap 2.5 NVMe tool-less tray
Software SFT-OOB-LIC 1 License key for enabling OOB BIOS management
Heatsink / Retention SNK-P0083P 2 2U Passive CPU Heat Sink for AMD Socket SP5 Processors, RoHS
*Power Supply PWS-1K63A-1R 2 1U 1000W/1600W redundant single output power supply with inp
*Fan FAN-0223L4 4 80x80x38 mm, 13.5K RPM Exhaust Fan for 2U Hyper-S(HS219),RoH
*Front Panel FPB-FP826-T 1 Chassis front control board for SC826
Notes:
  1. Parts with * are inside the chassis
  2. Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Optional Parts List
Part Number Qty Description
24 Drive Bay SATA Configuration RSC-H-68G5  2 1U LHS Hyper Riser card with one PCI-E 5.0 X16(Slot 1-2 / 3-4)
RSC-H-68G5  3 1U LHS Hyper Riser card with one PCI-E 5.0 X16(Slot 1, 3, 5)
CBL-PWEX-1136YB-25  1 [NR]MicroHi(2x4 to 2x2Y),PH3.0,25/25cm,YRB,8.5A/p,18AWG(Slot 3-4 Riser power cable)
CBL-PWEX-1136-40  1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG(Slot 1 power cable)
(Parts for 4x PCIe 5.0 x 16 support) - -
(Cables for 24 SATA support) - -
CBL-PWEX-1136-40  1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG(Slot 1-2 riser power cable)
CBL-MCIO-1226AM5R 2 [NR] MCIOx8 (STR to RA),26cm,LNRV,30AWG(Slot 5, 7 Riser cable)
MCP-120-82927-0N 1 Support bracket
CBL-MCIO-1255S4Y 3 [NR] (MCIO x8 to 2 SlimSAS x4), STR, 55cm, 30AWG(HDD slots 0 ~ 23)
CBL-MCIO-1222AM5 2 [NR] MCIOx8 (STR to STR),22cm,LNRV,30AWG(Slot 5/6 Riser cable)
CBL-GNZ4-1227M5YRR16 1 [NR](GENZ 4C STR to 2 MCIO) x8 RA/RA 27/16cm(Slot 3 Riser cable)
MCP-240-21908-0N 1 Riser bracket for Slot 5-8
CBL-CDAT-1062 1 i2C Cable
CBL-GNZ4-1227M5YR21 1 [NR](GENZ 4C STR to 2 MCIO) x8 STR/RA 27/21cm(Slot 3-4 Riser cable)
CBL-MCIO-1233M5R  1 [NR] MCIO x8 (STR to RA),33cm,85OHM(Slot 1 Riser cable)
MCP-240-21108-0N 2 Riser bracket
CBL-MCIO-1232M5  1 [NR] MCIO x8 (STR to STR),32cm,85OHM(Slot 2 Riser cable)
CBL-MCIO-1226M5R  1 [NR] MCIO x8 (STR to RA),26CM,85OHM(Slot 1 Riser cable)
LBL-4000  3 Cabled PCI-E Slot Warning Label, 0.236in x 2.913in(Slot 2, 4, 6, 8 cover)
RSC-H2-6888G5L  1 2U LHS Hyper Riser card with one PCI-E 5.0 X16(Slot 5-8)
RSC-H-6G5L 1 1U LHS Hyper riser card with one PCI-E 5.0 X16 (Slot 7)
(Parts for 8x PCIe 5.0 x 8 support) - -
CBL-PWEX-1136YB-25 2 [NR]MicroHi(2x4 to 2x2Y),PH3.0,25/25cm,YRB,8.5A/p,18AWG(Slot 5, 7 power cable)
Serial Port DTK Cable with PCIe Bracket CBL-0010L 1 9-Pin 26CM Serial Port DTK Cable with PCIe Bracket
Hyper A+ Server AS -2125HS-TNR (Complete System Only ) New
  1. Products
  2. Systems
  3. Hyper
  4. AS -2125HS-TNR