|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X13DEM
CSE-HE211-R000NFP
|
1
1
|
Super X13DEM Motherboard
2U Chassis
|
Add-on Card / Module
|
AOM-HE211-AIOM-X13-P |
1 |
AIOM extension board for Hyper-E 2U, X13 MB,RoHS |
AOM-HS119-IO-P |
1 |
Hyper IO Board,RoHS |
Backplane
|
BPN-NVME5-HE211N-S6 |
1 |
1U 6-port all hybrids backplane support up to 6x SAS3/SATA3/NVME5 storage devices |
Cable
|
CBL-SAST-1243LP-85 |
1 |
SlimlineLP x8 (STR to STR),INT,30CM,85 OHM,RoHS |
CBL-PWEX-1142-40 OR |
1 |
MicroHi,(2x4 to 2x4),PH3.0,40CM,8A/pin,18AWG,RoHS |
CBL-PWEX-1142B-40 |
|
MicroHi(2x4 to 2x4), PH3.0, 40cm, 8.5A/p, 18AWG, RoHS |
CBL-CDAT-1290F |
1 |
[NR] FRONT CNTL,20 TO 20 PIN,P0.5,FLAT,90CM,STD,RoHS |
CBL-PWCD-0160-IS |
2 |
PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH |
CBL-PWEX-1104-8 |
1 |
[NR] 2x4,PH3.0,M to 2x3,PH2.0,F,3A/pin,22AWG,8CM |
Fan
|
FAN-0224L4 |
6 |
60x60x56 mm, 17K-17K RPM, Counter-rotating Cooling Fan for Hyper-E Rear I/O Series Servers |
Air Shroud
|
MCP-310-21103-0B |
1 |
HE211 Mylar air shroud for X12DHM PWS,RoHS |
MCP-310-21106-0B |
4 |
HE211 Mylar air shroud for X12DHM 8-Barlow Pass Memory,RoHS |
Power Supply
|
PWS-1K30D-1R |
2 |
1U 1300W -48Vdc single output power supply |
Software
|
SFT-OOB-LIC |
1 |
License key for enabling OOB BIOS management |
Heatsink / Retention
|
SNK-P0088PR |
2 |
2U Proprietary Passive CPU Heat Sink for X13 Generation Hyper-E Series Servers |
*Front Panel
|
FPB-FP826-T |
1 |
Chassis front control board for SC826 |
*Drive Tray(s)
|
MCP-220-00178-0B |
6 |
2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive), for SC119UH |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|