Key Applications
Key Features
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Standard Parts (Parts Included) | |||
| Part Number | Qty | Description | |
| Motherboard / Chassis |
MBD-X13QEH+ CSE-218HTS-R3K2AWP |
1 1 |
Super X13QEH+ Motherboard 2U Chassis |
| Backplane | BPN-NVME5-HS219N-S24 | 1 | NVMe Gen5 24-slot direct-attached backplane, support NVMe Gen5/SAS4/SAS3/SATA HDD/SSDs.,RoHS |
| Cable | CBL-CDAT-0716 | 2 | 4 Pin to 4 Pin I2C cable for JBOD chassis, 25cm, 26AWG |
| CBL-MCIO-1215M5RR | 1 | MCIO x8 (RA to RA),15CM,85ohm,RoHS | |
| CBL-MCIO-1223M5RR | 4 | MCIO x8 (RA to RA),23cm,30AWG,G5,RoHS | |
| CBL-PWEX-1141-40 | 2 | MicroHi (2x4 to 2x4), PH3.0, 40CM, 10.5A/p, 16AWG, RoHS | |
| CBL-SAST-1286-100 | 2 | Slimline x4 (STR) to Slimline x4 (STR),INT,85CM,100 OHM, | |
| CBL-CDAT-0676-66 | 1 | [NR] FRONT CNTL,20 TO 20 PIN,PH0.5, FFC,FLAT,66CM,STD | |
| CBL-CDAT-0681-70 | 1 | [NR] I-PEX,Frnt Ctrl,(2X10F to 2X10F),PH0.5,70CM,40AWG,RoHS | |
| CBL-PWCD-0174-IS | 4 | PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,14AWG,RoHS/REACH | |
| CBL-PWEX-1069 | 6 | PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,30CM,22AWG,5A/pin,RoHS | |
| Drive Tray(s) | MCP-220-00155-0B | 24 | Metallic black gen-3 hot-swap tool-less 2.5 HDD tray |
| Air Shroud | MCP-310-21815-0B | 2 | Mylar front CPU air shroud for X13QEH+ in SC218H2 |
| MCP-310-21816-0B | 2 | Mylar rear CPU air shroud for X13QEH+ in SC218H2 with 2U HS | |
| MCP-310-21821-0B | 8 | Mylar memory air shroud for X13QEH+ in SC218H2 | |
| Riser Card | RSC-D2-666G5 | 1 | 2U LHS DCO Riser card with three PCIe 5.0 X16 slots,HF, |
| RSC-S2R-668G5 | 1 | 2U RHS Standard Riser card with two PCIe 5.0 X16 and on | |
| Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management |
| Heatsink / Retention | SNK-P0088P | 2 | 2U Passive CPU HS for X13 Intel Eagle Stream Platform |
| SNK-P0089P | 2 | 1.5U Passive 45 mm Tall CPU Heat Sink for X13 SYS-241H/E | |
| *Power Supply | PWS-1K62A-1R | 4 | AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
| *Power Distributor | PDB-PT418H-DSG | 2 | Pass through board w 4PWS redundancy input & up to 3600W out |
| *Fan | FAN-0237L4 | 6 | 60x60x56 mm, 17K-17K RPM, Counter-rotating Cooling Fan for S |
| *Front Panel | FPB-FP826-TUV | 1 | Chassis front control board for SC826 with VGA, 2xUSB |
| *Rail Set | MCP-290-00057-0N | 1 | Rail set, quick/quick, default for 4U 17.2" W |
| MCP-290-00060-0N | 1 | Threaded rail adapter default for round hole rack | |
Notes:
|
|||
| Optional Parts List | |||
| Part Number | Qty | Description | |
| CPU Carrier (Require 4pcs of one PN only) | SKT-1333L-0000-FXC | 4 | Intel SPR 84xxH Socket E LGA4677, E1A XCC carrier, DG 1.0, RoHS (Brand FOXCONN) |
| SKT-1424L-001B-LTS | 4 | Intel SPR 64xxH Socket E E1B carrier LGA 4677 W/SHIM SPR MCC, DG1.0 ,RoHS (Brand LOTES) | |
| SKT-1424L-001B-FXC | 4 | Intel SPR 64xxH Socket E E1B carrier LGA 4677 W/SHIM SPR MCC, DG1.0, RoHS (Brand FOXCONN) | |
| SKT-1333L-0001-LTS | 4 | Intel SPR 84xxH Socket E LGA4677, E1A XCC carrier, DG 1.0, NO SHIM, (Brand LOTES) | |
| GPU DW FL Support Kit | MCP-310-21820-0B | 2 | 1U Evac CPU Air Shroud |
| MCP-240-21828-0N | 1 | GPU card bracket set for DW full length GPU (Supports 2x DW GPUs) | |
| SNK-P2087PV-2 | 1 | 1U Right EVAC CPU Heat Sink | |
| SNK-P2087PV-1 | 1 | 1U Left EVAC CPU Heat Sink | |
| GPU Power Cable(s) | CBL-PWEX-0962Y-20 | 1/GPU | 16-pin power cable (Example H100) |
CBL-PWEX-1040 • |
1/GPU | 8-pin CPU to 8-pin PCIe power connector (Requires 1x CBL-PWEX-1148-20) | |
| CBL-PWEX-1148-20 • |
1/GPU | 8-pin CPU power cable (Example A6000, A100, A40 and etc.) | |
| Intel 6434H High Frequency Support | SNK-P2088P | 2 | 2U Passive EVAC CPU Heat Sink for X13 241H/E Series Servers |
| NVMe Intel VROC Controller | AOC-VROCSTNMOD | 1 | Intel VROC HW key (RSTe) standard upgrade module |
| AOC-VROCPREMOD • |
1 | Intel VROC Premium, RAID 0, 1, 5, 10 | |
| NVMe Support Kit | CBL-MCIO-1210M5 | 1 ~ 12 | MCIO x8 (STR to STR),10CM,85OHM,RoHS (1 cable supports 2 NVMe U.2 Drives) |
| MCP-220-00196-0B | 1 ~ 24 | Metallic black gen-3 hot-swap 2.5" NVMe tool-less tray | |
| RAID Controller 01-08pcs SATA3/SAS | CBL-SAST-1281-100 | 1 | Slimline x8 (STR) to 2x Slimline x4 (STR),80CM,100 OHM |
| AOC-S3908L-H8IR-16DD | 1 | 8 int 12Gb/s ports, x8 Gen4, ROC - LP | |
| RAID Controller 09-16pcs SATA3/SAS | CBL-SAST-1281-100 | 2 | Slimline x8 (STR) to 2x Slimline x4 (STR),80CM,100 OHM |
| AOC-S3916L-H16IR-32DD | 1 | 16 int 12Gb/s ports, x8 Gen4, ROC - LP | |
| RAID Controller 17-24pcs SATA3/SAS | AOC-S3908L-H8IR-16DD | 1 | 8 int 12Gb/s ports, x8 Gen4, ROC - LP |
| CBL-SAST-1281-100 | 3 | Slimline x8 (STR) to 2x Slimline x4 (STR),80CM,100 OHM | |
| AOC-S3916L-H16IR-32DD | 1 | 16 int 12Gb/s ports, x8 Gen4, ROC - LP | |
| RAID Controller CacheVault(s) | BTR-CVPM05 | 1 ~ 2 | CacheVault for Broadcom RAID Controller (Ex. S3908/S3916) |
| MCP-240-00203-0N | 1 | BTR-CVPM05 Supercap mounting bracket for PCIe location (Support up to 2 BTR) | |
| BTR-CV3916-U1 | 1 ~ 2 | CacheVault Supercap with chassis sidewall mounting kit | |
| Rail w/ Cable Arm Support Kit | MCP-290-00128-0N | 1 | Gen2 cable arm for Ultra 2U |
| MCP-290-00127-0N | 1 | 39" rail set, quick/quick, 17.2"W, for 2U Gen2 cable arm | |
| TPM Security Module | AOM-TPM-9672V | 1 | TPM 2.0 with 10 pins SPI,RoHS (Vertical) |
| AOM-TPM-9672V-FIPS | 1 | TPM 2.0 with 10 pins SPI support FIPS 140,RoHS (Vertical) | |
| AOM-TPM-9670V | 1 | SPI TPM 2.0 using SLB9670 (Vertical) | |
Titanium Level