 |
 |
 |
Part Number
 |
Qty
 |
Description
 |
Motherboard / Chassis |
MBD-X12SPI-TF
CSV-946STS-R1K6LPP
|
1
1
|
Super X12SPI-TF Motherboard
4U Chassis
|
Add-on Card / Module
|
AOC-S3916L-H16IR-P |
1 |
16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD w/ exp,RoHS |
Backplane
|
BPN-SAS3-826TQ-B2B |
1 |
2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD |
Backplane
|
BPN-SAS3-946SEL1-1 |
2 |
30bay top-load SAS3 single expander E1C BPN for 946S (use 2 per 60-bay system),RoHS |
Cable 1
|
CBL-CDAT-0728 |
2 |
4 Pin to 4 Pin I2C Cable, 65cm, 26AWG, 4 Wires, Pinout 1-1 |
Cable 2
|
CBL-PWEX-0861 |
1 |
Powerlug to 5.7 Radsok, black 12AWG, 32cm for SC946S |
Cable 3
|
CBL-PWEX-0862 |
1 |
Powerlug to 5.7 Radsok, black 12AWG, 53cm for SC946S |
Cable 4
|
CBL-PWEX-0863 |
1 |
Powerlug to 5.7 Radsok, yel 12AWG, 32cm for SC946S |
Cable 5
|
CBL-PWEX-0864 |
1 |
Powerlug to 5.7 Radsok, yel 12AWG, 53cm for SC946S |
Cable 6
|
CBL-SAST-1281-100 |
2 |
Slimline x8 (STR) to 2x Slimline x4 (STR),80CM,100 OHM, |
Parts
|
MCP-160-94602-0B |
1 |
New mylar for BPN-SAS3-946SEL1-1 use in SC946S chassis; Rohs |
Software
|
SFT-OOB-LIC |
1 |
License key for enabling OOB BIOS management |
Heatsink / Retention
|
SNK-P0078P |
1 |
2U Passive CPU Heat Sink for X12 Generation Intel Whitley and Cedar Island Platforms |
*Power Supply
|
PWS-1K66P-1R |
2 |
1U 1600W Redundant Platinum Power Supply 73.5mm width,RoHS/REACH,PBF |
*Power Distributor
|
PDB-PT946S-L824 |
1 |
4U PDB support over 2KW for SC946S and 45bay system.,RoHS |
*Cable 7
|
CBL-0087 |
1 |
CBL,FRONT CNTL,16 TO 16 PIN,Ribbon,50CM |
*Cable 8
|
CBL-0160L |
2 |
US POWER CORD 16AWG, PB FREE |
*Cable 9
|
CBL-0303L |
1 |
4PIN POWER CABLE, ST TO RA, 40CM |
*Cable 10
|
CBL-0459L |
2 |
AC Power Cord Latch Clamp |
*Cable 11
|
CBL-0481L |
2 |
30 AWG 81CM SATA Cable S-S |
*Cable 12
|
CBL-CDAT-0841 |
1 |
2X4F to 2X4F,PH2.54,round SGPIO cable,81CM,28AWG,RoHS |
*FAN 1
|
FAN-0184L4 |
5 |
80x80x38 mm, 14.4K RPM, Rear Exhaust Fan for SC946S Chassis (60-bay) |
*Front Panel
|
FPB-FP829H |
1 |
Front Control Board for SC829H chassis |
*Drive Tray(s)
|
MCP-220-00117-0B |
2 |
Black gen-3 hot-swap tool-less 2.5- inch HDD tray |
*Drive Tray(s)
|
MCP-220-94601-0N |
60 |
SC946ED 3.5\" / 2.5\" tool-less HDD tray |
*Rear Window
|
MCP-220-94612-0N |
1 |
SC946L MB tray assembly for UP MB, 7x slots |
*Rail Set
|
MCP-290-00133-0N |
1 |
Cable Management Arm, 2U height, 4 |
*Rail Set
|
MCP-290-00137-0N |
1 |
Rail set, Auto-latch, quick/quick, default 4U 17.2";W |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|