 |
|
 |
| SYS-1029P-WTRT |
- SuperServer 1029P-WTRT (Black)
|
| |
|
| CPU |
- Dual Socket P (LGA 3647)
- Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
- Support CPU TDP 70-165W*
|
| Cores |
- Up to 28 Cores with Intel® HT Technology
|
| Note |
* Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
|
| |
|
| Memory Capacity |
- 12 DIMM slots
- Up to 1.5TB ECC 3DS LRDIMM, 768GB ECC RDIMM, DDR4 up to 2666MHz
|
| Memory Type |
- 2666/2400/2133MHz ECC DDR4 SDRAM
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| Network Controllers |
- Dual LAN with 10Gbase-T from C622
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Video |
|
| |
|
| SATA |
- 8 SATA3 (6 Gbps) ports and 2 NVMe/SATA3 hybrid ports
|
| LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 6 USB 3.0 ports (4 rear, 2 front via header)
|
| Video |
|
| DOM |
- 2 SuperDOM (Disk on Module) ports
|
| |
|
| BIOS Type |
|
| |
|
| Software |
|
| Power Configurations |
- ACPI / APM Power Management
|
| |
|
| CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- Network activity LEDs
- Universal Information (UID) LED
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 (FHHL) slots
- 1 PCI-E 3.0 x8 (LP) slot
- 1 PCI-E 3.0 x16 for Add-on-Module (AOM)
- 1 PCI-E 3.0 x4 NVMe M.2 slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
|
|
| Hot-swap |
- 8 SATA3 (6Gbps) ports and 2 NVMe/SATA3 hybrid ports (connected to onboard storage controller)
|
| |
|
|
| SAS/SATA HDD Backplane |
| |
|
|
| Fans |
- 4 Counter-rotating 4cm PWM fans, 2 fans for AOC cooling
|
| |
|
|
| 700W/750W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100 - 140Vac / 8 - 6A / 50-60Hz
- 200 - 240Vac / 4.5 - 3.8A / 50-60Hz
- 200 - 240Vdc / 4.5 - 3.8A (CCC Only)
|
| +12V |
- Max: 58A / Min: 0.5A (100 - 140Vac)
- Max: 62A / Min: 0.5A (200 - 240Vac)
- Max: 62A / Min: 0.5A (200 - 240Vdc)
(CB/CCC Only)
|
| +5V sb |
|
| Output Type |
- Gold Finger Connector Mating with Molex 45984-4343
|
| Certification |
UL/cUL/CB/BSMI/CE/CCC
Platinum Certified
[ Test Report ]
|
| |
|
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
