 |  |
 |
Siehe Teileliste
|
 |
 | |
 |
 |
Teil Nummer
 |
Menge
 |
Beschreibung
 |
| Motherboard/Gehäuse |
MBD-X11DPU-V
CSE-119UHTS-R1K62HP-NEBS
|
1 1 |
Super X11DPU-V Motherboard CSE-119UHTS-R1K62HP-NEBS
|
|
Backplane
|
BPN-SAS3-119A-N12 |
1 |
1U Hybrid BPN für 12x2,5"; SAS3/SATA3/NVMe Speichergeräte |
|
Kabel 1
|
0190 |
1 |
CBL,FRONT CNTL,20 BIS 20 PIN,RA,RND TUBE,30CM,28AWG |
|
Kabel 2
|
0781 |
1 |
PWYCB,2X4F/GPU-Weiß an TWO 2X2F,P4.2, (5,12V),65/65CM,18AWG,RoHS |
|
Kabel 3
|
1067 |
1 |
PWEX,2X2F/P4.2 TO 2x4F/P4.2,BLK*2,YEL*1,RED*1,61CM,16AWG |
|
Kabel 5
|
0655 |
1 |
(SATA 8–11) SAS (ST) – SAS(RA-RS EXIT), 6 G, intern, 47 cm, SB, 30 AWG |
|
Kabel 6
|
0656 |
1 |
(SATA 4-7) SAS (ST) SAS(RA-RS EXIT), 6 G, intern, 39 cm, SB, 30 AWG |
|
Kabel 7
|
0657 |
1 |
(SATA 0–3) SAS (ST) – SAS(RA-RS EXIT), 6 G, intern, 55 cm, SB, 30 AWG |
|
Kabel 8
|
1 |
1 |
(NVMe 0-1) SLIMLINE x8 (RE) an 2x Oculink x4, 63/63CM,85 OHM |
|
Kabel 9
|
85 |
1 |
(NVMe 4.5) SLIMLINE SAS (RE) auf 2x Oculink x4, INT, 49 cm, 85 Ω |
|
Kabel 10
|
85 |
1 |
(NVMe 2-3) SLIMLINE x8 (RE) an 2x Oculink x4,INT, 54CM, 85 OHM |
|
Laufwerksschacht(e)
|
0 |
6 |
2,5-Dünnprofil-Laufwerkseinschub, orangefarbene Lasche (für hotswap NVMe-Laufwerk), für SC119UH |
|
Laufwerksschacht(e)
|
0 |
6 |
2,5-Dünnprofil-Laufwerksschacht, Standard-Farblasche, für SC119UH |
|
Luftabschirmung
|
0 |
1 |
(CPU2) Mylar-Luftabdeckung für SC116U (X11 24DIMM, linke Seite) |
|
Luftabschirmung
|
0 |
1 |
(CPU1) Rechtsseitige Luftabdeckung mit Schaumstoff-Luftblock |
|
Riser-Karte
|
RSC-R1UW-2E16 |
1 |
1U LHS WIO Riser Karte mit zwei PCI-E x16 Steckplätzen |
|
Riser-Karte
|
RSC-R1UW-E8R |
1 |
1U RHS WIO Riser Karte mit einem PCI-E x8 Steckplatz |
|
Kühlkörper / Rückhaltung
|
SNK-P0067PS |
2 |
Passiver 1U-CPU-Kühlkörper für die X11 Purley-Plattform mit schmalem Rückhaltemechanismus |
|
*
Stromversorgung
|
1 |
2 |
AC-DC 1600W, Titanium Level, Redundanz, 1U, DC-Ausgang: +12V und +12Vs, 203 x 73,5 x 40 mm, AC-Eingang: 90 - 264 VAC/47-63Hz, PMBus 1.2 mit DSP-Controller,HF,RoHS/REACH |
|
*
Kabel 10
|
0218 |
1 |
CBL,CNTL-PANELKONVERTER,FÜR 809H und CSE119UH,FFC,20PIN,15C |
|
*
Kabel 11
|
CBL-CUSB-0996 |
1 |
USB 3.0(F) Typ A, RA zu USB3.0 20pin,60CM,26/30AWG,RoHS |
|
*
FAN 1
|
4 |
8 |
40x40x56 mm, 23,3K-20,3K U/min, gegenläufiger Lüfter/td>
| |
*
Frontplatte
|
FPB-FP119UH |
1 |
Vordere Steuerplatine für 119UHTS 1U Ultra |
|
*
Heckscheibe
|
0 |
1 |
Rückfenster für SC819U, 119U werkzeugloses Gehäuse (keine Öffnung) |
|
*
Schienensatz
|
0 |
1 Satz |
Äußere Schiene, Schnellverschluss-Typ, 25,6" bis 33,05" |
|
*
Schienensatz
|
0 |
1 Satz |
Innenschiene, Verlängerung, lang (schnell) für 1HE 17,2 |
|
*
Schienensatz
|
0 |
1 Satz |
Innere Schiene, vorne, Schnellspanner (mit Rändelschraube) |
|
*
Luftabschirmung
|
0 |
1 |
Kunststoff-Luftabdeckung für SC819U, 119U, 829U, 219U (PWS), RoHS/REACH |
Anmerkungen: - Die mit * gekennzeichneten Teile befinden sich innerhalb des Fahrgestells.
- Überzählige Teile werden möglicherweise nicht versandt, einschließlich, aber nicht beschränkt auf überzählige Laufwerkseinschübe, Lüfter, Riser Brackets, Luftabdeckungen, IO Shields, Kabel.....etc.
|
|
|
|
 | |
 | | |
Teil Nummer |
Menge |
Beschreibung |
| CPU |
P4X-CLX6230R-SRGZA |
2 |
Intel Xeon Gold 6230R Prozessor, 26 Kerne, 2.10GHz, 36MB, 150W
|
| Speicher |
29
29
29
MEM-DR432L-SL01-ER29
29
29
29
|
- |
64GB, DDR4-2933, RDIMM, Micron
64GB, DDR4-2933, RDIMM, Hynix
32GB, DDR4-2933, RDIMM, Hynix
32GB, DDR4-2933, RDIMM, Samsung
32GB, DDR4-2933, RDIMM, Micron
16GB, DDR4-2933, RDIMM, Micron
16GB, DDR4-2933, RDIMM, Hynix
|
| NVMe-SSD |
HDS-2VD-MTFDHAL11TTCW1AR
HDS-SUN0-MZWLL6T4HMLA05
HDS-S2T1-MZ7LH3T8HMLT05
HDS-SUN1-MZQLB3T8HALS07
HDS-IUN2-SSDPE2KX020T8
HDS-IUN0-SSDPE2KE016T8
HDS-MMN-MTFDHBA256TCK1AS
|
- |
11TB, Micron 9200 ECO, <1 DWPD
6,4TB, Samsung PM1725B, 3 DWPD
3,84TB, Samsung PM883, 1,3 DWPD
3,84 TB, Samsung PM983, 1,3 DWPD
2TB, Intel P4510, 1 DWPD
1.6TB, Intel P4610, 3 DWPD
Micron 2200 256GB NVMe PCIe3.0x4 TLC M.2 22x80mm
|
| Riser-Karte |
RSC-UMR-8
RSC-R1UW-2E16
RSC-R1UW-E8R
|
-
|
1U Ultra RHS Riser-Karte mit 1 PCIE/SATA Hybrid M.2 &1 PCIE
1U LHS WIO Riser Karte mit zwei PCI-E x16 Steckplätzen
1U RHS WIO Riser Karte mit einem PCI-E x8 Steckplatz
|
| SATA-SSD |
HDS-I2T0-SSDSC2KG038T8
HDS-I2T0-SSDSC2KB480G8
|
-
|
3.8TB, Intel D3-S4610, 3 DWPD
480GB, Intel D3-S4510, <2 DWPD
|
| SAS |
200
HDS-X2A-XS400ME70004
|
-
|
480 GB, WDC/HGST Ultrastar SS530, 1 DWPD
400 GB, Seagate Lange, 10 DWPD
|
| Speichersteuerkarte und Kabel(n) |
AOC-S3108L-H8iR-16DD & 2x CBL-SAST-0593 |
1 |
Standard-LP, 8 interne Anschlüsse, 12 Gb/s pro Anschluss – Gen3, 240 Festplatten, RAID 0, 1, 5, 6, 10, 50, 60; SAS , 12 G, intern, 60 cm, 30 AWG
|
| Netzwerkkarte(n) |
AOC-S25G-m2S
AOC-S100G-M2C |
- |
Standard LP, 2x 25GbE SFP28, Mellanox ConnectX-4 LX DE
Standard LP, 2x 100GbE QSFP28, Mellanox ConnectX-4 LX DE
|
| TPM-Sicherheitsmodul |
AOM-TPM-9670H-S |
1 |
TCG 2.0-konformes vertrauenswürdiges Plattformmodul (TPM), Horizontal FF |
| Ultra |
AOC-URN4-m2TS und MCP-240-81915-0N AOC-URN4-b2XT und MCP-240-81909-0N AOC-URN4 |
1 |
2 Anschlüsse 25GbE SFP28, Mellanox CX-4 Lx DE 2 Anschlüsse 10GbE RJ45, Broadcom BCM57416 Kein Onboard-NIC |
| Globale Dienstleistungen und Unterstützung |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1 Jahre Vor-Ort-Service 24x7x4 3/2/1 Jahre NBD-Dienst vor Ort |
| Software |
SFT-OOB-LIZ -  |
1 |
OOB-Management-Paket (pro Knotenlizenz) |
| Software |
SFT-DCMS-Einzel |
1 |
DataCenter Management-Paket (Lizenz pro Knoten) |
Teileliste ausblenden
|
|
|
|