|
|
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DPD-M25
CSE-802TS-R804AMP |
1 1 |
Super X11DPD-M25 Motherboard
1U 12x 3.5" HDD and 4x 2.5"(7mm) chassis with 800W PSU, S-AIOM |
Add-on Card / Module
|
AOM-S3224-DPD-L-P |
1 |
DPD MB, SAS 3224 I/O Controller,HF,RoHS |
Backplane
|
BPN-NVME3-802N-S4 |
1 |
4-Port Hybrid Backplane Supports 4 x 2.5 |
Backplane
|
BPN-SAS3-802A-2 |
3 |
4-Port Backplane Supports 4 x 3.5" SAS/SATA HDD,HF,RoHS |
Cable 1
|
CBL-CDAT-0930 |
1 |
CBL,7PIN TO 7PIN,P1.5/1.0mm,17.2CM,26/28AWG,RoHS |
Cable 2
|
CBL-PWCD-0174-IS |
2 |
PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,14AWG,RoHS/REACH |
Cable 3
|
CBL-PWEX-1056 |
1 |
BPN PWR,2P/P3.0 to 3P/P3.0, 12V, 60CM,18AWG, 6A/pin,RoHS |
Cable 4
|
CBL-SAST-1028 |
1 |
SLIMLINE SAS, INT,Passive Latch,150 CM, power x4, 115 CM,RoH |
Cable 5
|
CBL-SAST-1101 |
1 |
[NR] SLIMLINE x8/2 to Oculink x4,INT, 106CM, 100 OHM,RoHS |
Cable 6
|
CBL-SAST-1102 |
1 |
[NR] SLIMLINE x8 (LE) to 2x Oculink x4,INT, 69/73CM, 85 OHM |
Cable 7
|
CBL-SAST-1103 |
1 |
[NR] SLIMLINE x8 (LE) to 2x Oculink x4,INT, 109/101CM, 85 OH |
Front Panel
|
FPB-802A-LED12 |
1 |
SC802 front HDD LED board,RoHS |
Riser Card
|
RSC-AOM-X6 |
1 |
Bridge board for AOM 3224/3216,HF,RoHS |
Riser Card
|
RSC-PR-6-X2 |
1 |
1U RHS TwinPro Riser card with one PCI-E 4.0 x16 slot,HF,RoH |
Riser Card
|
RSC-X-6G4 |
1 |
1U LHS Storage riser card with one PCI-E 4.0 x16 slot,HF,RoH |
Heatsink / Retention
|
SNK-P0067PS |
2 |
1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
*
Power Supply
|
PWS-804P-1R |
2 |
1U 800W 100-240VAC/50-60Hz, and DC240V input |
*
Power Distributor
|
PDB-PTLB16-8814 |
1 |
1U support redundanct powers up to 1200W power distributor |
*
Cable 8
|
CBL-CDAT-0914 |
1 |
CBL,SGPIO,4 PIN,F/P2.5 TO 4 PIN,F/P1.25,96.5CM,RoHS |
*
Cable 9
|
CBL-CDAT-0963 |
1 |
SERIAL,2X10/P2.54 TO P1.25, 84CM,RoHS |
*
Cable 10
|
CBL-CUSB-0834 |
1 |
USB 2.0, 2*5 pin to 8 pin, 95CM |
*
FAN 1
|
FAN-0141L4 |
6 |
40x40x56 mm 20.5K RPM / 17.6K RPM Counter-rotating Fan |
*
Front Panel
|
FPB-FP802 |
1 |
Front control board for 802 chassis, 2*USB2.0, optional thermal sensor |
*
Drive Tray(s)
|
MCP-220-00161-0B |
4 |
SC802 2.5" NVME HDD Tray (fit up to 7mm only) |
*
Drive Tray(s)
|
MCP-220-00162-0N |
12 |
SC802 3.5" internal HDD Tray |
*
Rear Window
|
MCP-240-80203-0N |
1 |
Rear window for SC802 (S-AIOM) |
*
Rail Set
|
MCP-290-00153-0N |
1 |
1U fixed rail set for SC802 w/ quick release (700mm to 940mm) |
*
Air Shroud
|
MCP-310-00104-0N |
2 |
Mylar air shroud for SC802(X11DPD) |
Notes: - Parts with * come with the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|