BIOS & BMC & Bundled & Microcode Package Download | AMD | Support

Bundle
1) BIOS version R 2.x supports 7002 and 7003 processors. 2) The Flash Utility in the package only supports BIOS update from version R 1.x to R 2.x, and rolling back is not allowed. 3) The default boot mode for BIOS version R2.x has been changed to EFI. If your OS is legacy, please press the key during POST to enter the BIOS setup to change boot mode after upgrading to R2.x. 4) When updating BIOS from version 2.1 to version 2.3a or above through SUM, don’t preserve the BIOS settings because some BIOS settings are modified after version 2.3a. 5) In the event of a BIOS rescue failure, please use your previous BIOS version and put it on your boot drive to boot, or you could recover it through the IPMI WebUI.

H13SSH

H13SSH_3.5_AS01.04.16_SAA1.2.0-p2

H13SSH_3.5_AS01.04.16_SAA1.2.0-p2.zip

H13SSH_BIOS_3.5_release_notes.pdf

H13SSH_IPMI_01_04_16_release_notes.pdf

Bundle

H14SST-G

H14SST-G_1.5_AS01.01.04.02_SAA1.2.0-p5

H14SST-G_1.5_AS01.01.04.02_SAA1.2.0-p5.zip

H14SST_G_BIOS_1_5_release_notes.pdf

H14SST_G_BMC_01_01_04_02_release_notes.pdf

Bundle
BIOS 1.3 and IPMI 01.00.09.00, or new version, are required to support AMD EPYC™ 9004 Series Processors.

H12SSL-C
H12SSL-C
H12SSL-C
H12SSL-C
H12SSL-CT
H12SSL-CT
H12SSL-CT
H12SSL-CT
H12SSL-i
H12SSL-i
H12SSL-i
H12SSL-i
H12SSL-NT
H12SSL-NT
H12SSL-NT
H12SSL-NT

H12SS-(i)(C)(CT)(NT)_3.3_AS1.05.02_SAA1.2.0-p

H12SS-(i)(C)(CT)(NT)_3.3_AS1.05.02_SAA1.2.0-p5.zip

H12SSL-i_C_CT_NT_BIOS_3.3_release_notes.pdf

H12SSL_i_C_CT_NT_BMC_1_05_02_release_notes.pdf

Bundle
BIOS: Please note, after update to BIOS R2.1 or later version, it cannot able to roll back to R2.1 or previous version. V2.0 or greater BIOS must work with BMC version equal or great than V1.00.32 If your BMC firmware version below V1.00.32, please update BMC firmware to V1.00.32 or greater before update to V2.0 BIOS. IPMI: For Milan-X processor support (EPYC 7003x series), please use the version equal or higher than V1.01.04

H14DSH

H14DSH_1.5_AS01.01.04.01_SAA1.3.0-p1

H14DSH_1.5_AS01.01.04.01_SAA1.3.0-p1.zip

H14DSH_BIOS_1.5_release_notes.pdf

H14DSH_IPMI_01.01.04.01_release_notes.pdf

Bundle

H11SSL-C
H11SSL-i
H11SSL-NC

3.3

BIOS_H11SSL_1A03_20250527_3.3_STDsp.zip

BIOS
BIOS R 2.x or above only supports MB Rev. 2.00, with 32MB SPI flash ROM to support both AMD 7001/7002 series processors.

H12DSi-N6
H12DSi-N6
H12DSi-NT6
H12DSi-NT6

H12DSI_3.3_AS01.06.01_SAA1.2.0-p2

H12DSI_3.3_AS01.06.01_SAA1.2.0-p2.zip

H12DSi-N6_NT6_BIOS_3.3_release_notes.pdf

H12DSi-N6_NT6_IPMI_01.06.01_Release_Notes.pdf

Bundle

H12SSW-iNL
H12SSW-iNL
H12SSW-NTL
H12SSW-NTL

H12SSW-(INL)(NTL)_3.3_AS08.10.38_SAA1.2.0-p2

H12SSW-(INL)(NTL)_3.3_AS08.10.38_SAA1.2.0-p2.zip

H12SSWL_BIOS_3_3_release_note.pdf

H12SSW-NT_IPMI_08_10_38_release_notes.pdf

Bundle

H13SST-G
H13SST-G
H13SST-GC
H13SST-GC

H13SST-G(C)_3.4_AS1.03.11_SAA1.2.0-p8

H13SST-G(C)_3.4_AS1.03.11_SAA1.2.0-p8.zip

H13SST_G_GC_BIOS_3_4_release_notes.pdf

H13SST_G_GC_BMC_01_03_11_release_notes.pdf

Bundle
For AMD EPYC™ 9005 Series Processor support, please ensure your motherboard revision is R2.0 or higher. The BIOS and BMC package version should be BIOS (V3.0 or higher) and BMC (V01.03.03 or higher). Please note that if you would like to roll back the BIOS from V3.x (AMD EPYC™ 9004/9005 Series Processor) dual BIOS to V1.x (AMD EPYC™ 9004 Series Processor) single BIOS, make sure to install AMD EPYC™ 9004 Series Processor before updating the BIOS. To support AMD EPYC™ Bergamo/Genoa-X processor, please update to BIOS v1.4 or higher.

H12SSW-iNR
H12SSW-iNR
H12SSW-NTR
H12SSW-NTR

H12SSW-NTR_3.3_AS01.05.21_SAA1.2.0-p2

H12SSW-NTR_3.3_AS01.05.21_SAA1.2.0-p2.zip

H12SSW-NTR_BIOS_3_3_release_notes.pdf

H12SSW_NTR_IPMI_01_05_21_release_notes.pdf

Bundle

H13SVW-N
H13SVW-N
H13SVW-NT
H13SVW-NT

H13SVW-N_1.3a_AS01.03.11_SAA1.2.0-p2

H13SVW-N_1.3a_AS01.03.11_SAA1.2.0-p2.zip

H13SVW_BIOS_1_3a_release_note.pdf

H13SVW_IPMI_01_03_11_release_notes.pdf

Bundle

H13SSL-N
H13SSL-N
H13SSL-NT
H13SSL-NT

H13SSL-NT_3.5_AS01.03.11_SAA1.2.0-p2

H13SSL-NT_3.5_AS01.03.11_SAA1.2.0-p2.zip

H13SSL_BIOS_3_5_release_notes.pdf

H13SSL_IPMI_01_03_11_release_notes.pdf

Bundle
For AMD EPYC™ 9005 Series Processor support, please ensure your motherboard revision is R2.0 or higher. The BIOS and BMC package versions should be BIOS (V3.0 or higher) and BMC (V01.03.03 or higher). Please note that if you would like to roll back the BIOS from V3.x (AMD EPYC™ 9004/9005 Series Processor) dual BIOS to V1.x (AMD EPYC™ 9004 Series Processor) single BIOS, make sure to install AMD EPYC™ 9004 Series Processor before updating the BIOS. To support the AMD EPYC™ Bergamo/Genoa-X processor, please update to BIOS v1.4 or higher.

H13DSG-O-CPU

H13DSG-O-CPU_3.5_AS01.03.11_SAA1.2.0-p5

H13DSG-O-CPU_3.5_AS01.03.11_SAA1.2.0-p5.zip

H13DSG-O-CPU_BIOS_3.5_release_notes.pdf

H13DSG-O-CPU_IPMI_01.03.11_Release_Notes.pdf

Bundle

H12DSG-Q-CPU6

H12DSG-Q-CPU6_3.2a_AS01.06.01_SAA1.2.0-p6

H12DSG-Q-CPU6_3.2a_AS01.06.01_SAA1.2.0-p6.zip

H12DSG-Q-CPU6_BIOS_3.2a_release_notes.pdf

H12DSG-Q-CPU6_IPMI_01.06.01_release_notes.pdf

Bundle
[BIOS 3.2a] 1) BIOS R2.x supports 7002 and 7003 processors. 2) The Flash Utility in the package only supports updating BIOS R1.x to R2.x. Rolling back is not allowed. 3) The default boot mode for BIOS R2.x has been changed to EFI. If your OS is legacy, press the ~~key during POST to enter the BIOS setup and change boot mode after upgrading from R1.x to R2.x. [IPMI 01.06.01] DON'T preserve SDR when updating IPMI from a revision older than 1.00.32.~~

H13DSH

H13DSH_3.5_AS01.03.11_SAA1.2.0-p2

H13DSH_3.5_AS01.03.11_SAA1.2.0-p2.zip

H13DSH_BIOS_3.5_release_notes.pdf

H13DSH_BMC_FW_01.03.11_release_notes.pdf

Bundle
1. Dependencies CPLD: F50F29 or above; please inquiry CPLD: F50F29 from Technical Support, For MBD R2.00 or above, please inquiry CPLD:F50F28. 2. For AMD EPYC™ 9005 Series Processor support, please ensure your motherboard revision is R2.0 or higher. The BIOS and BMC package version should be BIOS (V3.0 or higher) and BMC (V01.03.03 or higher). 3. Please note that if you would like to roll back the BIOS from V3.x (AMD EPYC™ 9004/9005 Series Processor) dual BIOS to V1.x (AMD EPYC™ 9004 Series Processor) single BIOS, make sure to install AMD EPYC™ 9004 Series Processor before updating the BIOS. 5. To support AMD EPYC™ Bergamo/Genoa-X processor, please update to BIOS v1.4 or higher.

H12SSFF-AN6

H12SSFF-AN6_3.3_AS01.05.32_SAA1.2.0

H12SSFF-AN6_3.3_AS01.05.32_SAA1.2.0.zip

H12SSFF-AN6_BIOS_3.3_release_notes.pdf

H12SSFF-AN6_IPMI_01.05.32_release_notes.pdf

Bundle
1. BIOS R2.0 and above supports 7002 and next generation processors. 2. Flash Utility in package supports BIOS R1.x update to R2.x only, cannot roll back.

H12SSG-AN6

H12SSG-AN6_3.3_AS00.01.20_SAA1.2.0-p2

H12SSG-AN6_3.3_AS00.01.20_SAA1.2.0-p2.zip

H12SSG-AN6_BIOS_3.3_release_notes.pdf

H12SSG-AN6_IPMI_00.01.20_Release_Notes.pdf

Bundle

H12SSG-ANP6

H12SSG-ANP6_3.3_AS00.01.20_SAA1.2.0-p2

H12SSG-ANP6_3.3_AS00.01.20_SAA1.2.0-p2.zip

H12SSG-ANP6_BIOS_3.3_release_notes.pdf

H12SSG-ANP6_IPMI_00.01.20_Release_Notes.pdf

Bundle

H12DSG-O-CPU

H12DSG-O-CPU_3.3_AS01.05.10_SAA1.2.0-p5

H12DSG-O-CPU_3.3_AS01.05.10_SAA1.2.0-p5.zip

H12DSG-O-CPU_BIOS_3.3_release_notes.pdf

H12DSG-O-CPU_IPMI_01.05.10_Release_Notes.pdf

Bundle

AS8125GS-TNMR2
AS8125GS-TNMR2-G1

24.14.14.76

AMD_MI300X_01.24.14.14.76.zip

Release_Notes.txt

GPU

H13QSH

H13QSH_1.1_AS01.04.10_SAA1.2.0-p2

H13QSH_1.1_AS01.04.10_SAA1.2.0-p2.zip

H13QSH_BIOS_1.1_release_notes.pdf

H13QSH_IPMI_01_04_10_release_notes.pdf

Bundle

H12SSW-iN
H12SSW-iN
H12SSW-NT
H12SSW-NT

H12SSW-IN_3.3_AS03.10.45_SUM2.14.0

H12SSW-IN_3.3_AS03.10.45_SUM2.14.0.zip

H12SSW_BIOS_3_3_release_note.pdf

H12SSW-NT_IPMI_03_10_45_release_notes.pdf

Bundle

H12SSW-AN6

H12SSW-AN6_3.3_AS01.06.01_SAA1.2.0-p2

H12SSW-AN6_3.3_AS01.06.01_SAA1.2.0-p2.zip

H12SSW-AN6_BIOS_3_3_release_notes.pdf

H12SSW_AN6_IPMI_01_06_01_release_notes.pdf

Bundle
Please note that IPMI firmware version v1.03.01 or newer has added the latest features. Once you upgrade to this firmware version, the device can't preserve the original setting after updating to the new BMC FW.

H13SAE-MF

2.3

BIOS_H13SAE-1C97_20250325_2.3_STDsp.zip

BIOS

H13SAE-MF

01.03.11

BMC_H13AST2600-F401MS_20250319_01.03.11_STDsp.zip

BMC

H13SSF

H13SSF_3.5_AS01.04.10_SAA1.2.0-p2

H13SSF_3.5_AS01.04.10_SAA1.2.0-p2.zip

H13SSF_BIOS_3.5_release_notes.pdf

H13SSF_IPMI_01.04.10_release_notes.pdf

Bundle

H12DGO-6

H12DGO-6_3.2_AS01.06.00_SAA1.2.0-p3

H12DGO-6_3.2_AS01.06.00_SAA1.2.0-p3.zip

H12DGO-6_BIOS_3.2_release_notes.pdf

H12DGO-6_IPMI_01.06.00_release_notes.pdf

Bundle
[BIOS 3.2] 1) BIOS R2.x/R3.x supports 7002 and 7003 processor. 2) Flash Utility in package only supports BIOS to update from R1.x to R2.x/R3.x, and rolling back is not allowed. 3) The default R2.x/R3.x BIOS boot mode has been changed to EFI. If your OS is legacy, please press the key during POST to enter into the BIOS setup to change boot mode after upgrade to R2.x/R3.x. [IPMI 01.06.00] 1) Please DON'T preserve SDR when updating IPMI from the revision older than 01.01.13. 2) The BMC configuration is changed from BMC FW 01.01.16 to 01.06.00. Please save and write configuration with BMC FW 01.06.00 once you need to deploy BMC configuration by SMC tool or BMC Web GUI.

H13DSG-O-CPU-D

H13DSG-O-CPU-D_3.4_AS01.03.16_SAA1.2.0-p2

H13DSG-O-CPU-D_3.4_AS01.03.16_SAA1.2.0-p2.zip

H13DSG-O-CPU-D_BIOS_3.4_release_notes.pdf

H13DSG-O-CPU-D_IPMI_01.03.16._Release_Notes.pdf

Bundle

H12SST-PS

H12SST-PS_3.1_AS03.10.45_SAA1.2.0-p2

H12SST-PS_3.1_AS03.10.45_SAA1.2.0-p2.zip

H12SST-PS_BIOS_3.1_release_notes.pdf

H12SST-PS_IPMI_03.10.45_Release_Notes.pdf

Bundle

H11DSU-iN

3.3

BIOS_H11DSU-0963_20250328_3.3_STDsp.zip

H11DSU-iN_BIOS_v3_3_Release_Notes.pdf

BIOS
BIOS R3.0 and newer only support MB Rev2.10 with 32MB SPI flash ROM to support both AMD 7001/7002 series processors

H11DSi
H11DSI-NT

3.3

BIOS_H11DSI-0964_20250328_3.3_STDsp.zip

H11DSi_BIOS_v3_3_Release_Notes.pdf

BIOS
BIOS R 2.x or above only supports MB Rev. 2.00, with 32MB SPI flash ROM to support both AMD 7001/7002 series processors.

H11DST-B

3.3

BIOS_H11DSTB_098A_20250328_3.3_STDsp.zip

H11DST_BIOS_3_3_release_note.pdf

BIOS
BIOS R 2.x or above only supports MB Rev. 2.00, with 32MB SPI flash ROM to support both AMD 7001/7002 series processors.

H11SSW-iN
H11SSW-NT

3.3

BIOS_H11SSW_1B19_20250328_3.3_STDsp.zip

H11SSW_BIOS_3_3_release_note.pdf

BIOS
BIOS R 2.x or above only supports MB Rev. 2.00, with 32MB SPI flash ROM to support both AMD 7001/7002 series processors.

BH12SSi-M25

BH12SSi-M25_3.1_AS01.05.22_SUM2.14.0-p5

BH12SSi-M25_3.1_AS01.05.22_SUM2.14.0-p5.zip

BH12SSi_M25_BIOS_3_1_release_notes.pdf

BH12SSi-M25_IPMI_01_05_22_release_notes.pdf

Bundle

H13SRD-F

H13SRD-F_1.4_AS01.03.09_SUM2.14.0-p9

H13SRD-F_1.4_AS01.03.09_SUM2.14.0-p9.zip

Bundle

H14SHM

H14SHM_1.3_AS01.01.00.03_SAA1.2.0-p2

H14SHM_1.3_AS01.01.00.03_SAA1.2.0-p2.zip

H14SHM_BIOS_1.3_release_notes.pdf

H14SHM_IPMI_01.01.00.03_release_notes.pdf

Bundle

H12SSFR-AN6

H12SSFR-AN6_3.1_AS01.05.03_SUM2.14.0-p8

H12SSFR-AN6_3.1_AS01.05.03_SUM2.14.0-p8.zip

H12SSFR-AN6_BIOS_3_1_release_notes.pdf

H12SSFR-AN6_IPMI_01_05_03_release_notes.pdf

Bundle

H12DST-B

H12DST-B_3.1_AS03.10.43_SAA1.2.0

H12DST-B_3.1_AS03.10.43_SAA1.2.0.zip

H12DST-B_BIOS_3.1_release_notes.pdf

H12DST-B_IPMI_3.10.43_Release_Notes.pdf

Bundle
1) BIOS R 2.x supports 7002 and 7003 processors. 2) Flash Utility in the package supports BIOS update from R1.x to R 2.x or R2.x to R2.x only, and rolling back is not allowed. 3) BIOS R 2.x requires the latest motherboard CPLD before updating. If you purchased the system before October 1, 2020, please contact Supermicro Technical Support for verification before updating the BIOS. 4) The default R2.x BIOS boot mode has been changed to EFI. If you have a legacy OS, please press the key during POST to enter the BIOS setting to change boot mode after upgrading to R2.x. 5) In the event of a BIOS rescue failure, please use your previous version of BIOS saved in your boot drive to boot or you could recover it through the IPMI WebUI.

H13SRA-F
H13SRA-TF

1.6

BIOS_H13SRA-1D2F_20250123_1.6_STDsp.zip

BIOS

H14DSG-O-CPU

H14DSG-O-CPU_1.3_AS01.00.09.00_SAA1.1.0-p5

H14DSG-O-CPU_1.3_AS01.00.09.00_SAA1.1.0-p5.zip

H14DSG-O-CPU_BIOS_1.3_release_notes.pdf

H14DSG-O-CPU_BMC_FW_01.00.09.00_release_notes.pdf

Bundle
1. To Support or AMD EPYC™ 9004 Series Processor, please ensure BIOS and BMC package version should be BIOS (V1.3 or higher) and BMC (V01.00.09.00 or higher).

H13SRH

1.5

BIOS_H13SRH-1D35_20241025_1.5_STDsp.zip

BIOS

H13SRH

01.03.41

BMC_H13AST2600-ROT20-E401MS_20241216_01.03.41_STDsp.zip

BMC

H14DST-F

H14DST-F_1.0_AS1.00.21.20_SAA1.2.0

H14DST-F_1.0_AS1.00.21.20_SAA1.2.0.zip

H14DST-F_BIOS_1_0_release_notes.pdf

H14DST-F_BMC_01_00_21_20_release_notes.pdf

Bundle

H13SRA-F
H13SRA-TF

01.03.02

BMC_H13AST2600-A501MS_20241114_01.03.02_STDsp.zip

BMC

H12DGQ-NT6

H12DGQ-NT6_3.0_AS01.04.02_SUM2.14.0-p5

H12DGQ-NT6_3.0_AS01.04.02_SUM2.14.0-p5.zip

H12DGQ-NT6_BIOS_3.0_release_notes.pdf

H12DGQ-NT6_IPMI_01.04.02_release_notes.pdf

Bundle

M12SWA-TF

2.2

BIOS_M12SWA-TF-1C1C_20240708_2.2_STDsp.zip

BIOS

M12SWA-TF

01.04.05

BMC_M12AST2600-B201MS_20240802_01.04.05_STDsp.zip

BMC

H11DSU-iN

01.52.21

BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip

H11DSU-iN_IPMI_v1_52_21_Release_Notes.pdf

BMC
Please note that IPMI firmware version v1.52.18 or newer is with key signed. Once you upgrade to this version firmware, the device cannot rollback to previous un-signed IPMI firmware. Please note that, following configuration items will get lost after upgrading to R1.52.13 or higher from version before R1.52.13 or roll back from R1.52.13 or higher to the version before R1.52.13. Please re-configure after upgrade or downgrade. "KCS Privilege", "UID Control", "Web Session", "Healthy Event log - advanced settings", "syslog", "network -Dynamic IPv6" and "network – Static IPv6".

H11SSW-iN
H11SSW-NT

01.52.21

BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip

H11SSW_IPMI_1_52_21_ECO_release_notes.pdf

BMC
Please note that IPMI firmware version v1.52.21 or newer is with the key signed. Once you upgrade to this firmware version, the device cannot rollback to the previous un-signed IPMI firmware.

H11SSL-C
H11SSL-i
H11SSL-NC

01.52.21

BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip

H11SSL_IPMI_1_52_21_ECO_release_notes.pdf

BMC
Please note that IPMI firmware version v1.52.21 or newer is with the key signed. Once you upgrade to this firmware version, the device cannot rollback to the previous un-signed IPMI firmware.

H11DSi
H11DSI-NT

01.52.21

BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip

H11DSi_H11DSi-NT_IPMI_1_52_21_Release_Notes.pdf

BMC
1. IPMI firmware version R1.52.21 or newer is with a signed key. Once you upgrade to this firmware version, the device cannot be rolled back to a previous, unsigned IPMI firmware. 2. The following configuration items will be lost after upgrading to R1.52.13 or higher from version before R1.52.13 or roll back from R1.52.13 or higher to the version before R1.52.13. Please re-configure after upgrade or downgrade: "KCS Privilege", "UID Control", "Web Session", "Healthy Event log - advanced settings", "syslog", "network -Dynamic IPv6" and "network – Static IPv6".

H11DST-B

01.52.21

BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip

BMC

H12DSU-iNR

H12DSU-INR_2.5_AS01.01.11_SUM2.10.0-p1

H12DSU-INR_2.5_AS01.01.11_SUM2.10.0-p1.zip

H12DSU-iNR_BIOS_2.5_release_notes.pdf

H12DSU-iNR_IPMI_01.01.11_release_notes.pdf

Bundle

H11DSU-iN

1.3

H11DSU9_715.zip