|
|
|
| |
| SSG-2029P-E1CR24H |
- SuperStorage 2029P-E1CR24H (Black)
|
|
|
CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
3 UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
Cores |
|
Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
|
|
Memory Capacity |
- 16 DIMM slots
- Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
|
|
Chipset |
|
SAS |
- SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID
- RAID 0, 1, 5, 6, 10, 50, 60
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
Network Controllers |
- Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Video |
|
|
|
LAN |
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 4 USB 3.0 ports (rear)
- 1 Type A
|
Video |
|
Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
BIOS Type |
|
|
|
Software |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Power fail LED
|
|
|
PCI-Express |
- 3 PCI-E 3.0 x16 slot
- 4 PCI-E 3.0 x8 slots
- Slot 2 & 3 occupied by controller and JBOD Expansion Port
|
| |
| Hot-swap |
- 24 Hot-swap 2.5" SAS3/SATA3 drive bays
- 2 Hot-swap 2.5" SATA3 drive bays (rear)
|
Optional |
- 2 Optional Onboard NVMe M.2
|
| |
| Expander based backplane |
| |
| Fans |
- 3 Hot-swap 8cm redundant PWM cooling fans
|
| |
| 1200W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 15-12A / 50-60Hz
- 200-240Vac / 8.5-7A / 50-60Hz
- 200-240Vdc / 8.5-7A (for CCC only)
|
+12V |
- Max: 83A / Min: 0A (100-127Vac)
- Max: 100A / Min: 0A (200-240Vac)
- Max: 100A / Min: 0A (200-240Vdc)
|
+5Vsb |
|
Output Type |
- 19 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
| |
| RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DPH-T
CSE-216BE1C4-R1K23LPB |
1 1 |
Super X11DPH-T Motherboard
2U Chassis |
Add-on Card / Module
|
AOC-S3108L-H8IR |
1
|
LSI 3108 based SAS3 RAID, 12Gb, 8 internal ports, 240HDD - RAID 0,1,10,5,6,50,60, Gen3 x8 Standard Low Profile |
Add-on Card / Module
|
AOM-SAS3-8I8E-LP |
1
|
8-port Mini SAS HD Int-to-Ext cable adapter w/ LP bracket,HF,RoHS/REACH |
Backplane
|
BPN-SAS3-216EL1-N4 |
1
|
24-port 2U SAS3 12Gbps single-expander backplane, support up to 20x 2.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices |
Cable 1
|
CBL-0099 |
1
|
Power extension cable; one HDD to two HDD and two FDD. 35/25/12cm. 22AWG |
Cable 2
|
CBL-SAST-0532 |
4
|
MINI SAS HD,12G,INT,50CM,30AWG |
Parts
|
MCP-220-82616-0N |
1
|
12G 2.5x2 Drive Kit w/ Status LED(216B/826B/417B/846X/847B) |
Parts
|
MCP-260-00042-0N |
1
|
STD I/O shield for X9 socket R server MB with Gasket. |
Heatsink / Retention
|
SNK-P0068PS |
1
|
2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Heatsink / Retention
|
SNK-P0068PSC |
1
|
2U Passive CPU Heat Sink with a Side Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Power Supply
|
PWS-1K23A-1R |
2
|
AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 360x76x40 mm,HF,RoHS/REACH |
FAN 1
|
FAN-0158L4 |
3
|
80x80x38 mm, 10.5K RPM, Optional Middle Cooling Fan for X10 2U Ultra and HFT Series Servers,RoHS/REACH |
Drive Tray(s) |
MCP-220-00047-0B |
24 |
Black 3rd Gen hot-swap 2.5" HDD tray |
|
|
|
| |
| |
Part Number |
Qty |
Description |
4 NVMe Drives Support |
AOC-SLG3-2E4R-O CBL-SAST-0590 MCP-220-00121-0B |
2 4 4 |
Dual-Port PCIe Gen-3 NVMe Internal Host Bus Adapter MINI SAS HD,INT,PCIe NVMe SSD, 70CM,30AWG Black gen-3 2.5 NVMe drive tray |
3108 Cache Protection |
BTR-TFM8G-LSICVM02 BKT-BBU-BRACKET-05 |
1 1 |
SuperCap Module Mounting PCIe Card |
Cable |
CBL-0099 |
1 |
HDD Y-Split Cable |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|