|
|
|
| |
| SSG-6029P-E1CR16T |
- SuperStorage 6029P-E1CR16T (Black)
|
|
|
CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
3 UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
Cores |
|
Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
|
|
Memory Capacity |
- 16 DIMM slots
- Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
|
|
Chipset |
|
SAS |
- SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID
- RAID 0, 1, 5, 6, 10, 50, 60
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
Network Controllers |
- Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Video |
|
|
|
LAN |
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 4 USB 3.0 ports (rear)
- 1 Type A
|
Video |
|
Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
BIOS Type |
|
|
|
Software |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Power fail LED
|
|
|
PCI-Express |
- 3 PCI-E 3.0 x16 slot
- 4 PCI-E 3.0 x8 slots
- Slot 3 occupied by controller
|
| |
| Hot-swap |
- 16 Hot-swap 3.5" SAS3/SATA3 drive bays including 4 optional NVMe drives
- 2 Hot-swap 2.5" SATA3 drive bays (rear)
|
Optional |
|
| |
| SAS3 12Gb/s direct attached storage backplane, w/ 24x SAS3 2.5" drive slots |
| |
| Fans |
- 3 Hot-swap 8cm redundant PWM cooling fans
|
| |
1600W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
+12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
12Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
| |
| RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DPH-T
CSE-829HE1C4-R1K62LPB |
1 1 |
Super X11DPH-T Motherboard
2U Chassis |
Add-on Card / Module
|
AOC-S3108L-H8IR-16DD-P |
1 |
AOC-S3108L-H8iR-16DD |
Backplane
|
BPN-SAS3-826EL1-N4 |
1 |
12-port 2U SAS3 12Gbps single-expander backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices |
Backplane
|
BPN-SAS3-829HA-A4 |
1 |
4-port internal SAS3 12Gbps backplane, support up to 4x 3.5-inch SAS3/SATA3 HDD/SSD |
Cable 1
|
CBL-SAST-0532 |
2 |
MINI SAS HD,12G,INT,50CM,30AWG |
Parts
|
MCP-260-00042-0N |
1 |
STD I/O shield for X9 socket R server MB with Gasket. |
Parts
|
MCP-220-82616-0N |
1
|
12G 2.5x2 Drive Kit w/ Status LED(216B/826B/417B/846X/847B) |
Heatsink / Retention
|
SNK-P0067PSWB |
1 |
1U Proprietary 96-mm Wide Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Heatsink / Retention
|
SNK-P0068APS4 |
1 |
2U Active CPU Heat Sink Supporting Narrow Bolster Plate Mounting Mechanism for X11 Purley Platform |
*
Power Supply
|
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
*
Power Distributor
|
PDB-PT829H-2824 |
1 |
2U standard output with 24Pin PDB support up to |
*
Cable 2
|
CBL-0160L |
2 |
NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) |
*
Cable 3
|
CBL-0217L |
1 |
CBL,CNTL PANEL CONVERTER,FOR SC826/846,FFC,16PIN,22CM |
*
FAN 1
|
FAN-0158L4 |
4 |
80x80x38 mm, 10.5K RPM, Optional Middle Cooling Fan for X10 2U Ultra and HFT Series Servers,RoHS/REACH |
*
Front Panel
|
FPB-FP829H |
1 |
Front Control Board for SC829H chassis |
*
Drive Tray(s)
|
MCP-220-00075-0B |
12 |
Black gen 5.5 hot-swap 3.5"; HDD tray |
*
Drive Tray(s)
|
MCP-220-82902-0N |
1 |
Middle tray plate for SC829H |
*
Drive Tray(s)
|
MCP-220-82903-0N |
4 |
Internal mid tray with handle for SC829H |
*
Front Panel
|
MCP-280-00018-0N |
1 |
SC826 front control board adapter |
*
Rail Set
|
MCP-290-00053-0N-01 |
1 |
36"; Rail set for Auto-latch, quick/quick, 2, 3U 17.2";W |
*
Drive Tray(s)
|
MCP-290-82607-0N |
1 |
826B/216B rear dummy cover for 2 X 2.5 |
*
Air Shroud
|
MCP-310-82930-0B |
1 |
Mylar 1U air shroud for SC829H X11 |
Notes: - Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|
|
|
|
| |
| |
Part Number |
Qty |
Description |
Converter Trays |
MCP-220-00118-0B MCP-220-00043-0N |
- - |
Black gen-5.5 tool-less 3.5-to-2.5 converter drive tray Black hot-swap gen 4 3.5 to 2.5 HDD tray |
Convert 2 Rear SATA to NVMe |
MCP-220-82619-0N AOC-SLG3-2E4R-O CBL-SAST-0849 |
1 1 2 |
2.5x2 NVMe Drive Kit for 216B/826B/417B/846X/847B,RoHS LP, PCIe3 x8, 2 internal Mini-SAS HD port redriver NVMe card MiniSAS HD source to OcuLink v 1.0,INT,PCIe,57CM,34AWG |
4 NVMe Drives Support |
AOC-SLG3-2E4R-O CBL-SAST-0590 MCP-220-00116-0B |
2 4 4 |
NVMe AOC Internal Mini-SAS HD cable for PCIe SSD NVMe, 12Gb/s, 70cm 3.5" to 2.5" NVMe drive tray |
Network Card(s) |
AOC-S25G-m2S AOC-S40G-I2Q AOC-SG-I2 More |
- - - - |
Standard LP, 2x 25GbE SFP28, Mellanox ConnectX-4 LX EN Standard LP 2-port 40GbE controller, Intel Fortville XL710 Standard LP 2-port GbE, Intel 82575 AOC Compatibility Matrix
|
3108 Cache Protection |
BTR-TFM8G-LSICVM02 BKT-BBU-BRACKET-05 |
1 1 |
SuperCap Module Mounting PCIe Card |
TPM security module (optional, not included) |
AOM-TPM-9670VAOM-TPM-9671V |
1 1 |
TPM module (Vertical) TPM 2.0TPM module (Vertical) TPM 1.2. |
Intel VROC RAID Key |
AOC-VROCINTMOD AOC-VROCSTNMOD AOC-VROCPREMOD |
1 1 1 |
Intel VROC, RAID 0, 1, 5, 10 (Intel SSD Only) Intel VROC Standard, RAID 0, 1, 10 Intel VROC Premium, RAID 0, 1, 5, 10 |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|