| Model | Rev | Download ZIP 1 | Release Notes | Description |
|---|---|---|---|---|
| H13SRD-F | 1.1 | BIOS_H13SRD-1C99_20231030_1.1_STDsp.zip | BIOS | |
| H13SRD-F | 01.01.10 | BMC_H13AST2600-F401MS_20231019_01.01.10_STDsp.zip | BMC | |
| H12SSW-iN H12SSW-iN H12SSW-NT H12SSW-NT | H12SSW-(iN)(NT)_2.7_AS3.10.38_SUM2.11.0-p1 | H12SSW-(iN)(NT)_2.7_AS3.10.38_SUM2.11.0-p1.zip | H12SSW_BIOS_2_7_release_note.pdf H12SSW-NT_IPMI__3_10_38_release_notes.pdf | Bundle |
| H12SSW-iNR H12SSW-iNR H12SSW-NTR H12SSW-NTR | H12SSW-(iNR)(NTR)_2.7_AS01.01.13_SUM2.11.0-p1 | H12SSW-(iNR)(NTR)_2.7_AS01.01.13_SUM2.11.0-p1.zip | H12SSW-NTR_BIOS_2_7_release_notes.pdf H12SSW_NTR_IPMI_01_01_13_release_notes.pdf | Bundle |
| H13DSG-O-CPU | H13DSG-O-CPU_1.6a_AS01.01.10_SUM2.13.0-p4 | H13DSG-O-CPU_1.6a_AS01.01.10_SUM2.13.0-p4.zip | H13DSG-O-CPU_BIOS_1.6a_release_notes.pdf H13DSG-O-CPU_IPMI_01.01.10_Release_Notes.pdf | Bundle |
| H12SSL-C H12SSL-C H12SSL-C H12SSL-C H12SSL-CT H12SSL-CT H12SSL-CT H12SSL-CT H12SSL-i H12SSL-i H12SSL-i H12SSL-i H12SSL-NT H12SSL-NT H12SSL-NT H12SSL-NT | H12SS-(i)(C)(CT)(NT)_2.7_AS1.10.10_SUM2.13.0- | H12SS-(i)(C)(CT)(NT)_2.7_AS1.10.10_SUM2.13.0-p3.zip | H12SSL-i_C_CT_NT_BIOS_2_7_release_notes.pdf H12SSL_i_C_CT_NT_BMC_1_1_10_release_notes.pdf | Bundle BIOS: Please note, after update to BIOS R2.1 or later version, it cannot able to roll back to R2.1 or previous version. V2.0 or greater BIOS must work with BMC version equal or great than V1.00.32 If your BMC firmware version below V1.00.32, please update BMC firmware to V1.00.32 or greater before update to V2.0 BIOS. IPMI: For Milan-X processor support (EPYC 7003x series), please use the version equal or higher than V1.01.04 |
| H13SSH | H13SSH_1.7_AS01.01.23_SUM2.13.0-p3 | H13SSH_1.7_AS01.01.23_SUM2.13.0-p3.zip | H13SSH_BIOS_1_7_1024_release_notes.pdf H13SSH_IPMI_01_01_23_1024_release_notes.pdf | Bundle |
| H12DSG-Q-CPU6 | H12DSG-Q-CPU6_2.6a_AS01.01.16_SUM2.12.0 | H12DSG-Q-CPU6_2.6a_AS01.01.16_SUM2.12.0.zip | H12DSG-Q-CPU6_BIOS_2.6a_release_notes.pdf H12DSG-Q-CPU6_IPMI_01.01.16_release_notes.pdf | Bundle [BIOS 2.6a] 1) BIOS R2.x supports 7002 and 7003 processors. 2) The Flash Utility in the package only supports BIOS R1.x to update to R2.x, and rolling back is not allowed. 3) The default R2.x BIOS boot mode has been changed to EFI. If your OS is legacy, please press the DEL key during POST to enter BIOS setup to change boot mode after upgrading the OS from R1.x to R2.x. [IPMI 01.01.16] 1) Please DON'T preserve SDR when updating IPMI from the revision older than 1.00.32. |
| H13SVW-NT | H13SVW-NT_1.1a_AS01.01.05_SUM2.12.0 | H13SVW-NT_1.1a_AS01.01.05_SUM2.12.0.zip | H13SVW_BIOS_1_1a_release_notes.pdf H13SVW_IPMI_01_01_05_release_notes.pdf | Bundle |
| H12DGQ-NT6 | H12DGQ-NT6_2.6b_AS01.01.24_SUM2.13.0-p3 | H12DGQ-NT6_2.6b_AS01.01.24_SUM2.13.0-p3.zip | H12DGQ-NT6_BIOS_2.6b_release_notes.pdf H12DGQ-NT6_IPMI_1.01.24_release_notes.pdf | Bundle In this BIOS revision 2.6b, the High Precision Event Timer settings and IOMMU related errors have been modified. Please refer to the release notes for details. |
| H13SSL-N H13SSL-N H13SSL-NT H13SSL-NT | H13SSL-(N)(NT)_1.6_AS01.01.08_SUM2.13.0-p3 | H13SSL-(N)(NT)_1.6_AS01.01.08_SUM2.13.0-p3.zip | H13SSL_BIOS_1_6_release_notes.pdf H13SSL_IPMI_01_01_08_release_notes_1115.pdf | Bundle "To support AMD EPYC Bergamo/Genoa-X processor, please update to BIOS v1.4 or higher." If the IPMI firmware revision is earlier than 01.01.01, please do not select the "Preserve" check box during the IPMI firmware update. |
| H12DSG-O-CPU | H12DSG-O-CPU_2.7_AS01.03.00_SUM2.12.0-p2 | H12DSG-O-CPU_2.7_AS01.03.00_SUM2.12.0-p2.zip | H12DSG-O-CPU_BIOS_2.7_release_notes.pdf H12DSG-O-CPU_IPMI_01.03.00_Release_Notes.pdf | Bundle [BIOS 2.7] 1.BIOS R 2.x now supports the 7002 and 7003 processors. The Flash Utility in the package only supports BIOS to update from R 1.x to R 2.x, and rolling back is not allowed. 2.DMI data CANNOT be reserved when BIOS was updated from 1.x BIOS to 2.x BIOS. 3.BIOS R2.2 (or above) can only roll back to R2.1, but it cannot roll back to R2.0 due to security updates. [IPMI 01.03.00] 1. When the firmware revision is 1.01.11 or above, don’t manually set the dedicated LAN port to 1 Gbs. 2. If the IPMI firmware revision is earlier than 1.01.01, please do not select the "Preserve SDR" check box during IPMI firmware update. |
| H13SSW | H13SSW_1.6_AS01.01.08_SUM2.12.0 | H13SSW_1.6_AS01.01.08_SUM2.12.0.zip | H13SSW_BIOS_1.6_release_notes.pdf H13SSW_IPMI_01.01.08_release_notes.pdf | Bundle To support AMD EPYC Bergamo/Genoa-X processor, please update to BIOS v1.4 or higher. |
| H13SAE-MF | 1.1a | BIOS_H13SAE-1C97_20231019_1.1a_STDsp.zip | BIOS | |
| H11DSi H11DSI-NT | 2.7 | BIOS_H11DSI-0964_20231025_2.7_STDsp.zip | H11DSi(-NT)_BIOS_2.7_release_notes.pdf | BIOS BIOS R 2.x only supports MB Rev. 2.00, with 32MB SPI flash ROM to support both AMD 7001/7002 series processors. |
| H11DST-B | 2.7 | BIOS_H11DSTB-098A_20231023_2.7_STDsp.zip | H11DST-B_BIOS_2.7_release_notes.pdf | BIOS BIOS R 2.x only supports MB Rev. 2.00, with 32MB SPI flash ROM to support both AMD 7001/7002 series processors. |
| H12DST-B | H12DST-B_2.6b_AS03.10.38_SUM2.12.0-p2 | H12DST-B_2.6b_AS03.10.38_SUM2.12.0-p2.zip | H12DST-B_BIOS_2.6b_release_notes.pdf H12DST-B_IPMI_3.10.38_Release_Notes.pdf | Bundle |
| H11DSU-iN | 2.7 | BIOS_H11DSU-0963_20231020_2.7_STDsp.zip | H11DSU-iN_BIOS_v2_7_Release_Notes.pdf | BIOS BIOS R2.7 only support MB Rev2.10 with 32MB SPI flash ROM to support both AMD 7001/7002 series processors |
| H11SSL-C H11SSL-i H11SSL-NC | 2.7 | BIOS_H11SSL_1A03_20231020_2.7_STDsp.zip | H11SSL_BIOS_2_7_release_note.pdf | BIOS |
| H12DGO-6 | H12DGO-6_2.6a_AS01.01.16_SUM2.12.0 | H12DGO-6_2.6a_AS01.01.16_SUM2.12.0.zip | H12DGO-6_BIOS_2.6a_release_notes.pdf H12DGO-6_IPMI_01.01.16_release_notes.pdf | Bundle [BIOS 2.6a] 1) BIOS R2.x supports 7002 and 7003 processor. 2) Flash Utility in package only supports BIOS to update from R1.x to R2.x, and rolling back is not allowed. 3) The default R2.x BIOS boot mode has been changed to EFI. If your OS is legacy, please press the Del key during POST to enter into the BIOS setup to change boot mode after upgrade to R2.x. [IPMI 01.01.16] 1) Please DON'T preserve SDR when updating IPMI from the revision older than 01.01.13. 2) A known issue is that MEL format is incorrectly shown when an input of Remote User/Remote Group at LDAP and AD is long. 3) A known issue is that the Modify Alert dialog box remains on the screen after navigating to the License page via the License tooltip. |
| H13SVW-N | H13SVW-N_1.1_AS01.01.05_SUM2.12.0 | H13SVW-N_1.1_AS01.01.05_SUM2.12.0.zip | H13SVW_BIOS_1_1_release_notes.pdf H13SVW_IPMI_01_01_05_release_notes.pdf | Bundle |
| H12DSU-iN | H12DSU-IN_2.6a_AS03.10.38_SUM2.12.0 | H12DSU-IN_2.6a_AS03.10.38_SUM2.12.0.zip | H12DSU-iN_BIOS_2.6a_Release_Notes.pdf H12DSU-iN_IPMI_3.10.38_Release_Notes.pdf | Bundle |
| H11DSU-iN | 01.52.21 | BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip | H11DSU-iN_IPMI_v1_52_21_Release_Notes.pdf | BMC Please note that IPMI firmware version v1.52.18 or newer is with key signed. Once you upgrade to this version firmware, the device cannot rollback to previous un-signed IPMI firmware. Please note that, following configuration items will get lost after upgrading to R1.52.13 or higher from version before R1.52.13 or roll back from R1.52.13 or higher to the version before R1.52.13. Please re-configure after upgrade or downgrade. "KCS Privilege", "UID Control", "Web Session", "Healthy Event log - advanced settings", "syslog", "network -Dynamic IPv6" and "network – Static IPv6". |
| H11SSW-iN H11SSW-NT | 01.52.21 | BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip | BMC Please note that IPMI firmware version v1.52.18 or newer is with the key signed. Once you upgrade to this firmware version, the device cannot rollback to the previous un-signed IPMI firmware. | |
| H11SSL-C H11SSL-i H11SSL-NC | 01.52.21 | BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip | H11SSL_IPMI_1_52_21_ECO_release_notes.pdf | BMC Please note that IPMI firmware version v1.52.18 or newer is with the key signed. Once you upgrade to this firmware version, the device cannot rollback to the previous un-signed IPMI firmware. |
| H12SST-PS | 03.10.38 | BMC_H12AST2500-B101MS_20230807_03.10.38_STDsp.zip | H12SST-PS_IPMI_03.10.38_Release_Notes.pdf | BMC The following item configurations will no longer be available after upgrading to R3.10.18 or any version higher than R3.09.02 or being rolled back to R3.10.18 or any version higher than the version R3.09.02. Please re-configure these items after upgrading or downgrading: "KCS Privilege," "UID Control," "Web Session," "Healthy Event log - advanced settings," "syslog," "network -Dynamic IPv6," and "network – Static IPv6." |
| H11SSW-iN H11SSW-NT | 2.6a | BIOS_H11SSW_1B19_20230928_2.6a_STDsp.zip | H11SSW_BIOS_2_6a_release_note.pdf | BIOS |
| H11DSi H11DSI-NT | 01.52.21 | BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip | H11DSi_H11DSi-NT_IPMI_1_52_21_Release_Notes.pdf | BMC 1. IPMI firmware version R1.52.18 or newer is with a signed key. Once you upgrade to this firmware version, the device cannot be rolled back to a previous, unsigned IPMI firmware. 2. The following configuration items will be lost after upgrading to R1.52.13 or higher from version before R1.52.13 or roll back from R1.52.13 or higher to the version before R1.52.13. Please re-configure after upgrade or downgrade: "KCS Privilege", "UID Control", "Web Session", "Healthy Event log - advanced settings", "syslog", "network -Dynamic IPv6" and "network – Static IPv6". |
| H11DST-B | 01.52.21 | BMC_H11AST2500_6101MS_20230926_01.52.21_STDsp.zip | BMC | |
| H13SST-G H13SST-G H13SST-GC H13SST-GC | H13SST-G(C)_1.5a_AS1.01.03_SUM2.11.0-p2 | H13SST-G(C)_1.5a_AS1.01.03_SUM2.11.0-p2.zip | H13SST_G_GC_BIOS_1_5a_release_notes.pdf H13SST_G_GC_BMC_01_01_03_release_notes.pdf | Bundle To support AMD EPYC Bergamo/Genoa-X processor, please update to BIOS v1.4 or higher. |
| H12SSW-AN6 | H12SSW-AN6_2.6a_AS01.01.17_SUM2.11.0-p1 | H12SSW-AN6_2.6a_AS01.01.17_SUM2.11.0-p1.zip | H12SSW-AN6_BIOS_2_6a_release_notes.pdf H12SSW_AN6_IPMI_17_release_notes.pdf | Bundle |
| H13SAE-MF | 01.01.08 | BMC_H13AST2600-F401MS_20230804_01.01.08_STDsp.zip | BMC | |
| H13DSH | H13DSH_1.4_AS01.00.17_SUM2.10.0-p6 | H13DSH_1.4_AS01.00.17_SUM2.10.0-p6.zip | H13DSH_BIOS_1.4_release_notes.pdf H13DSH_IPMI_01.00.17_release_notes.pdf | Bundle 1. Please update BIOS:1.4 and BMC:01.00.17 with corresponding CPLD:F5.0F.1C, contact our technical support for any inquiries about CPLD. 2. "To support AMD EPYC Bergamo, Genoa Xprocessor, please update to BIOS v1.4 or higher." |
| H13SSF | H13SSF_1.0_AS01.01.07_SUM2.11.0-p1 | H13SSF_1.0_AS01.01.07_SUM2.11.0-p1.zip | H13SSF_BIOS_1.0_release_notes.pdf H13SSF_IPMI_1.01.07_release_notes.pdf | Bundle |
| M11SDV-4C-LN4F M11SDV-4CT-LN4F M11SDV-8C+-LN4F M11SDV-8C-LN4F M11SDV-8CT-LN4F | 03.17.05 | BMC_M11AST2500_20230725_03.17.05_STDsp.zip | BMC | |
| M12SWA-TF | 2.1 | BIOS_M12SWA-TF-1C1C_20230605_2.1_STDsp.zip | BIOS | |
| H13DSG-O-CPU-D | H13DSG-O-CPU-D_1.4a_AS01.00.12_SUM2.10.0-p6 | H13DSG-O-CPU-D_1.4a_AS01.00.12_SUM2.10.0-p6.zip | H13DSG-O-CPU-D_BIOS_1.4a_release_notes.pdf H13DSG-O-CPU-D_IPMI_01.00.12_Release_Notes.pdf | Bundle |
| H12DSi-N6 H12DSi-NT6 | 01.01.25 | BMC_H12AST2600-ROT-E201MS_20230414_01.01.25_STDsp.zip | H12DSi-N6_NT6_IPMI_1.01.25_Release_Notes.pdf | BMC If the IPMI firmware revision is earlier than 1.01.24, please do not select the "Preserve SDR" check box during IPMI firmware update. |
| H12SST-PS | 2.6 | BIOS_H12SST-1B45_20230414_2.6.zip | H12SST-PS_BIOS_2.6_release_notes.pdf | BIOS 1) BIOS R 2.x supports 7002 and 7003 processors. 2) Flash Utility in the package only supports BIOS to update from R1.x to R 2.x or R2.x to R2.x, and rolling back is not allowed. 3) BIOS R 2.x requires the latest motherboard CPLD before updating. If you purchased the system before 3/13/2021, please contact Supermicro Technical Support to verify before updating the BIOS. 4) The default R2.x BIOS boot mode has been changed to EFI. If your OS is legacy, please press the |
| H12DSi-N6 H12DSi-NT6 | 2.6 | BIOS_H12DSI-1C22_20230413_2.6_STDsp.zip | H12DSi-N6_NT6_BIOS_2.6_release_notes.pdf | BIOS |
| H12DSU-iNR | H12DSU-INR_2.5_AS01.01.11_SUM2.10.0-p1 | H12DSU-INR_2.5_AS01.01.11_SUM2.10.0-p1.zip | H12DSU-iNR_BIOS_2.5_release_notes.pdf H12DSU-iNR_IPMI_01.01.11_release_notes.pdf | Bundle |
| BH12SSi-M25 | 01.02.62 | BMC_B12AST2500-ROT-1201MS_20230309_01.02.62_STDsp.zip | BH12SSi-M25_IPMI_01_02_62_release_notes.pdf | BMC |
| M11SDV-4C-LN4F M11SDV-4CT-LN4F M11SDV-8C+-LN4F M11SDV-8C-LN4F M11SDV-8CT-LN4F | 1.1b | M11SDV3.306.zip | BIOS | |
| H12SSFF-AN6 | H12SSFF-AN6_2.5_AS01.02.59_SUM2.9.0-p1 | H12SSFF-AN6_2.5_AS01.02.59_SUM2.9.0-p1.zip | H12SSFF-AN6_BIOS_2.5_release_notes.pdf H12SSFF-AN6_IPMI_01.02.59_release_notes.pdf | Bundle |
| M12SWA-TF | 01.00.17 | BMC_M12AST2600-B201MS_20230116_01.00.17_STDsp.zip | BMC | |
| H12SSFR-AN6 | 01.01.21 | BMC_H12AST2600-ROT-E201MS_20230111_01.01.21_STDsp.zip | H12SSFR-AN6_IPMI_01_01_21_release_notes.pdf | BMC |
| BH12SSi-M25 | 2.5 | BIOS_BH12SSi-1B8F_20221116_2.5_STDsp.zip | BH12SSi_M25_BIOS_2_5_release_notes.pdf | BIOS |
| H12SSFR-AN6 | 2.5 | BIOS_H12SSFR-1C14_20221012_2.5_STDsp.zip | H12SSFR-AN6_BIOS_2_5_release_notes.pdf | BIOS |
| H12SSG-AN6 | 00.01.12 | BMC_H12SSG-AST2600-ROT1PLUS-9301MS_20220727_00.01.12_STDsp.zip | H12SSG-AN6_IPMI_00.01.12_Release_Notes.pdf | BMC |
| H12SSG-AN6 | 2.4 | BIOS_H12SSG-1C2C_20220623_2.4_STDsp.zip | H12SSG-AN6_BIOS_2.4_release_notes.pdf | BIOS |
| H12SSW-iNL H12SSW-iNL H12SSW-NTL H12SSW-NTL | H12SSW-(INL)(NTL)_2.4_AS08.10.25_SUM2.7.0-p1 | H12SSW-(INL)(NTL)_2.4_AS08.10.25_SUM2.7.0-p1.zip | H12SSWL_BIOS_24_release_note.pdf H12SSW-NTL_IPMI_release_notes.pdf | Bundle |
| H12SSG-ANP6 | 2.4 | BIOS_H12SSG-ANP6-1C2C_20220316_2.4_STDsp.zip | H12SSG-ANP6_BIOS_2.4_release_notes.pdf | BIOS |
| H12SSG-ANP6 | 00.01.06 | BMC_H12SSG-AN6-AST2600-ROT1PLUS-9301MS_20220316_00.01.06_STDsp.bin.zip | H12SSG-ANP6_IPMI_00.01.06_Release_Notes.pdf | BMC |
| H8SCM-F | 3.5b | H8SCM6_318.zip | BIOS | |
| H8SGL H8SGL-F | 3.5b | H8SGL6_318.zip | BIOS | |
| H8SGL-F | 3.20 | SMT_320.zip | BMC | |
| H8SCM-F | 3.20 | SMT_320.zip | BMC | |
| H8DAE-2 | 3.5c | DA82B309.zip | BIOS Note: BIOS R 3.5 or later is required to support AMD's Istanbul six-core processors |