SuperServer AS -1125HS-TNR (Complete System Only)

1U Hyper with 8 hot-swap 2.5" NVMe/SAS/SATA bays and 3 PCIe 5.0 x16 slots

AS -1125HS-TNR Main AS -1125HS-TNR Angle AS -1125HS-TNR Top AS -1125HS-TNR Front AS -1125HS-TNR Rear
Integrated Board: H13DSH
Learn more

Key Applications

  • Virtualization
  • Software-defined Storage
  • AI Inference and Machine Learning
  • Cloud Computing
  • Enterprise Server

Key Features

  1. 4th Generation AMD EPYC™ 9004 Series Processors
  2. ASPEED AST2600
  3. 24x DIMM slots, DDR5-4800MHz memory, support up to 6 TB
  4. Flexible networking options with 1 AIOM networking slot (OCP NIC 3.0 compatible)
    2 PCIe 5.0 x16 FH, 10.5"L
    1 PCIe 5.0 x16, FH, 6.6"L
  5. 800/1200W Redundant Power Supplies  (Titanium Level);(*Full redundancy based on configuration and application load)
  6. 2 On-board PCIe 3.0 x4 M.2 NVMe 80mm/110mm (Boot)
...
...
Specifications Resources & Downloads Parts List
Specifications
Product SKUs
A+ Server AS -1125HS-TNR
Motherboard
Super H13DSH
Processor
CPU
Core Count
  • Up to 256C/512T
Note
  • Supports up to 360W TDP CPUs (Air Cooled)*
  • *Air Cooled CPUs with TDP over 280W only supported under specific conditions. Contact a Supermicro representative for details.
System Memory
Memory
  • Slot Count: 24 DIMM slots
  • Max Memory (1DPC): Up to 6TB 4800MT/s ECC DDR5 RDIMM
  • View Memory Options
Memory Voltage
  • 1.1V
On-Board Devices
Chipset
  • System on Chip
Network Connectivity
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
NVMe
Input / Output
LAN
  • 1 RJ45 1 GbE Dedicated IPMI LAN port(s)
USB
  • 2 USB 3.0 port(s) (rear)
  • 1 USB 3.0 port(s) (front)
Video
  • 1 VGA port(s)
System BIOS
BIOS Type
  • AMI 256MB SPI Flash
BIOS Features
  • UEFI 2.8
  • SMBIOS 3.5 or later
  • ACPI 6.4
  • Plug and Play (PnP)
  • USB Keyboard support
Management
Software
Power configurations
  • ACPI Power Management
  • Power-on mode control for AC power loss recovery
  • Power button override mechanism,
Security
Hardware
  • Trusted Platform Module (TPM) 2.0
  • Silicon Root of Trust (RoT) – NIST 800-193 Compliant
Features
  • Cryptographically Signed Firmware
  • Secure Boot
  • Secure Firmware Updates
  • Automatic Firmware Recovery
  • Supply Chain Security: Remote Attestation
  • Runtime BMC Protections
  • System Lockdown
PC Health Monitoring
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Voltage
  • System temperature, Memory temperature, CPU temperature, 3.3V standby, +5V standby, +5V, +3.3V, +12V, CPU thermal trip support
Chassis
Form Factor
  • 1U
Model
  • CSE-HS119-R1K24P2-A
Dimensions and Weight
Height
  • 1.7" (43 mm)
Width
  • 17.2" (437 mm)
Depth
  • 29.4" (747 mm)
Package
  • 8.1" (H) x 23.8" (W) x 40.6" (D)
Weight
  • Gross Weight: 51 lbs (23.1 kg)
  • Net Weight: 32 lbs (14.5 kg)
Available Color
  • Black front & silver body
Front Panel
LED
  • HDD activity
  • LAN1 activity
  • Power status
  • System information
Buttons
  • Power On/Off
  • UID button
Expansion Slots
PCI-Express (PCIe) Configuration
  • Default
    • 1 PCIe 5.0 x16 FHHL slot(s)
    • 2 PCIe 5.0 x16 FH/10.5″L slot(s)
    • 1 PCIe 5.0 x16 AIOM slot(s) (OCP 3.0 compatible)
  • View AOC Options
Drive Bays / Storage
Drive Bays Configuration
  • Default: Total 8 bay(s)
    • 8 front hot-swap 2.5" NVMe*/SAS*/SATA* drive bay(s)
  • Option A: Total 12 bay(s)
    • 12 front hot-swap 2.5" NVMe*/SAS*/SATA* drive bay(s)
  • (*NVMe/SAS/SATA support may require additional storage controller and/or cables, please see the optional parts list for details)
  • View Drive Options
M.2
System Cooling
Fans
  • 8 counter-rotating 40x40x56mm Fan(s)
Power Supply
1200W Redundant Titanium Level power supplies
Dimension (WxHxL)
  • 73.5 x 40 x 265 mm
+12V
  • Max: 66.7A / Min: 0A (100Vac-127Vac)
  • Max: 100A / Min: 0A (200Vac-240Vac)
  • Max: 100A / Min: 0A (230Vdc-240Vdc) (for CCC only)
12V SB
  • Max: 2.1A / Min: 0A
AC Input
  • 800W: 100-127Vac / 50-60Hz
  • 1200W: 200-240Vac / 50-60Hz
  • 1200W: 230-240Vdc / 50-60Hz (for CCC only)
Output Type
  • Backplanes (gold finger)
Operating Environment
Environmental Spec.
  • Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)
Resources & Downloads
Parts List
Standard Parts (Parts Included)
Part Number Qty Description
Motherboard / Chassis MBD-H13DSH

CSE-HS119-R1K24P2-A
1

1
Super H13DSH Motherboard

1U Chassis
Add-on Card / Module AOM-HS119-IO-P 1 Hyper IO Board,RoHS
Backplane BPN-NVME5-HS119N-S8L 1 1U 8-slot backplane support 8x SAS3/SATA3/NVME5 storage devices for Hyper-S platform,RoHS
Cable CBL-GNZ5-1307 1 GNZ4C+ X16 (STR to STR),G5,7CM,85 Ohm,RoHS
CBL-MCIO-1221M5RE 1 MCIO x8 (STR to RE),21cm,32AWG,G5,RoHS
CBL-MCIO-1228M5RE 1 MCIO x8 (STR to RE), 28cm, 30#, Gen5, 85Ohm, RoHS
CBL-PWEX-1142B-20 1 MicroHi (2x4F to 2x4F), PH3.0, 20cm, 8.5A/p,18#,RoHS
CBL-SAST-1225LP 1 SlimlineLP x8 (LE) to SlimlineLP x8 (RA),30CM,75/85/100,
CBL-CUSB-1265-119 1 [NR] USB 3.0(F) Type A, RA to USB3.0 20pin,65CM,26/32AWG
CBL-PWCD-0160-IS 2 PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH
Fan FAN-0216L4-1 8 40x40x56 mm, 31K-26.6K RPM, Hot Swap, Counter-rotating Fan,,
Drive Tray(s) MCP-220-00178-0B 8 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive), for SC119UH
Air Shroud MCP-310-11916-0N 1 1U Hyper Chassis HS119 CPU Plastic Air Shroud (CPU1) for H13DSH
MCP-310-11917-0N 1 1U Hyper Chassis HS119 CPU Plastic Air Shroud (CPU2) for H13DSH
Riser Card RSC-H-66G5L 1 1U LHS Hyper riser card with two PCIe 5.0X16 slots,HF,R
RSC-H-6G5L 1 1U LHS Hyper riser card with one PCIe 5.0 X16 slot,HF,R
Software SFT-OOB-LIC 1 License key for enabling OOB BIOS management
Heatsink / Retention SNK-P0082P 2 1U Passive CPU Heat Sink for AMD Socket SP5 Processors
*Power Supply PWS-1K24A-1R 2 1U 800W/1200W Redundant Titanium w/PMBus power supply, W73.5xH40xL265mm, C14 inlet
*Front Panel FPB-FP119UH 1 Front control board for 119UHTS 1U Ultra
*Rail Set MCP-290-11903-0N 1 30.5" ball-bearing rail set, without auto latch for Hyper 1U & 2U
Notes:
  1. Parts with * are inside the chassis
  2. Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Optional Parts List
Part Number Qty Description
***Data Cable Options*** - - -
Component - - -
8 NVMe CBL-KIT-1125HS-TNR-8N 1 8 NVME cable kit
8 NVME + 4 SAS CBL-KIT-1125HS-TNR-8N 1 8 NVME cable kit
CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
AOC-S3808L-L8iT OR
AOC-S3908L-H8iR
CBL-SAST-1262LP-100
1
1
1
8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD
8 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD
Slimline x8 (STR) to SlimLineLP x4 STR,98CM
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
8 NVME + 4NVME CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
CBL-KIT-1125HS-TNR-8N 1 8 NVME cable kit
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
CBL-MCIO-1343M5FRF 1 MCIO x8 (FR to STR), FFC,43cm,30AWG
CBL-MCIO-1352M5FRF 1 MCIO x8 (FR to STR), FFC,52cm,30AWG
8 NVME+ 4 SATA CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
CBL-KIT-1125HS-TNR-8N 1 8 NVME cable kit
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-MCIO-1255L4Y 1 MCIO x8 to 2 SlimSAS LP x4,STR,55cm
8 SAS AOC-S3808L-L8iT OR
AOC-S3908L-H8iR
CBL-SAST-1273LP-100
1
1
1
8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD
8 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD
Slimline x8 (STR) to 2x SlimLLP x4 STR,69/83CM
8 SAS + 4 SAS BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
AOC-S3816L-L16iT OR
AOC-S3916L-H16iR
CBL-SAST-1273LP-100 (Support HDD slot 0~7)
CBL-SAST-1262LP-100 (Support HDD slot 8~11)
1
1
1
1
16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD
16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD
Slimline x8 (LE) to 2x Slimline x4 (STR),FFC,76/76CM
Slimline x8 (STR) to Slimline x4 (STR),64CM
CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
8 SATA CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-MCIO-1255L4Y 1 MCIO x8 to 2 SlimSAS LP x4,STR,55cm
8 SATA + 4 SATA CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-MCIO-1255L4Y 2 MCIO x8 to 2 SlimSAS LP x4,STR,55cm
Chassis Rear Handle Kit MCP-290-11905-0N 1 Hyper 1U rear handle kit for immersion cooling
Drive Bay Dummy Cover MCP-220-11902-0B - Dummy cover for two 2.5" drive bays (top & bottom drive bays)
Rail Set MCP-290-21103-0N 1 21.65" ball-bearing rail set for Hyper servers
MCP-290-11903-0N (included in the system ) 1 30.5" ball-bearing rail set for Hyper servers
MCP-290-11902-0N 1 35.25" ball-bearing rail set for Hyper servers
MCP-290-11901-0N 1 41" ball-bearing rail set for Hyper servers
Serial Port DTK Cable with PCIe Bracket CBL-0010L 1 9-Pin 26CM Serial Port DTK Cable with PCIe Bracket
TPM security module AOM-TPM-9672V 1 SPI capable vertical TPM 2.0
AOM-TPM-9670V 1 SPI capable TPM 2.0 with Infineon 9670 controller; vertical form factor
AOM-TPM-9672V-FIPS 1 AOM-TPM-9672V-FIPS TPM 2.0 with 10 pins SPI support FIPS
AOM-TPM-9670H-FIPS 1 AOM-TPM-9670H-FIPS supporting FIPS 140-2
Hyper A+ Server AS -1125HS-TNR (Complete System Only )